307B Excavator Caterpillar


Seat Heater - If Equipped

Usage:

307B AFB

------ WARNING! ------

Preexisting skin conditions can be aggravated by continued use of the seat heater. If skin condition worsens, discontinue use of the seat heater.




Illustration 1g00612762

The seat heater switch is located on the left console.

Seat Heater - In cold weather, the seat heater can be activated for operator comfort.

ON - Push the right side of the seat heater switch in order to activate the seat heater.

OFF - Push the left side of the seat heater switch in order to deactivate the seat heater.


NOTICE

Do not leave any heavy item or object with a sharp point on the seat.

Do not cover the seat or seat back with a blank, seat cushion or any other similar covering. The seat heater can be over heated. Be sure to remove any spills on the seat and thoroughly dry the spill.


Note: The thermostat in the seat heater deactivates when the temperature in the cab is above 10°C (50°F). The seat heater will not operate when the thermostat is deactivated.

Caterpillar Information System:

307B Excavator Overload Warning Device
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Indicators and Gauges - Test
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Gutter Brush Adjustment
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
307B Excavator Machine Systems Blade Cylinder - Disassemble
307B Excavator Machine System Specifications Relief Valve (Pilot)
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
330B Excavator Material Handler Machine Systems Boom Cylinder - Remove
C-9 Engines for Caterpillar Built Machines Engine Oil Pan
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install
C15 and C18 Petroleum Generator Sets Engine Operation with Intermittent Diagnostic Codes
3114, 3116 and 3126 MUI Engine Governors Installation of Governor on 1U7326 Governor Calibration Bench
307B Excavator Machine Systems Blade Cylinder - Assemble
307B Excavator Quick Coupler Control - If Equipped
BP15 Pickup Broom Maintenance Interval Schedule
307B Excavator Implement Changing
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Oil Filter (Hydraulic, Return) - Install
C-9 Engines for Caterpillar Built Machines Engine Oil Pump
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.