Quick Coupler Control - If Equipped
Show/hide table
Illustration 1 | g00612932 |
The switch for the quick coupler is located on the left console.
Show/hide table
ENGAGE - Turn the switch to this position in order to retract the wedge. The wedge must be retracted in order to lock the implement in place. |
Show/hide table
DISENGAGE - Turn the switch to this position in order to extend the wedge. The wedge must be extended in order to release the work tool. |
Note: An alarm will sound whenever the switch is in the DISENGAGE position.
Show/hide table
OFF - Turn the switch to this position in order to turn off the quick coupler. |
For further details, see Operation and Maintenance Manual, "Implement Changing".
Caterpillar Information System:
307B Excavator Machine Systems Blade Cylinder - Assemble
3114, 3116 and 3126 MUI Engine Governors Installation of Governor on 1U7326 Governor Calibration Bench
C15 and C18 Petroleum Generator Sets Engine Operation with Intermittent Diagnostic Codes
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install
C-9 Engines for Caterpillar Built Machines Engine Oil Pan
330B Excavator Material Handler Machine Systems Boom Cylinder - Remove
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
307B Excavator Seat Heater - If Equipped
307B Excavator Overload Warning Device
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Indicators and Gauges - Test
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
BP15 Pickup Broom Maintenance Interval Schedule
307B Excavator Implement Changing
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Oil Filter (Hydraulic, Return) - Install
C-9 Engines for Caterpillar Built Machines Engine Oil Pump
3126B Engines for Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install
307B Excavator Machine System Specifications Lines (Boom Swing Cylinder)
312B Excavator Machine Systems Boom Lowering Control Valve - Disassemble
3126B Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
307B Excavator Air Conditioner/Cab Heater Filter - Inspect/Replace
365B Excavators Hydraulic System Swing Pump - Test - Positive Flow Control
C-9 Engines for Caterpillar Built Machines Cylinder Head
3524B Engine for Caterpillar Built Machines Cylinder Liner - Remove