Overload Warning Device
Show/hide table
| |
| Illustration 1 | g00612758 |
The switch for the overload warning device is located on the left console.
Show/hide table
|
Overload Warning Device - In lifting applications, the overload warning device activates a buzzer when there is an unstable load condition. When this occurs, the bucket load should be reduced or the stick should be moved inward. |
Show/hide table
|
On - Push the right side of the switch in order to activate the overload warning device. |
Show/hide table
|
Off - Push the left side of the switch in order to deactivate the overload warning device. |
Caterpillar Information System:
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Indicators and Gauges - Test
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Gutter Brush Adjustment
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
307B Excavator Machine Systems Blade Cylinder - Disassemble
307B Excavator Machine System Specifications Relief Valve (Pilot)
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Install
307B Excavator Seat Heater - If Equipped
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Remove
330B Excavator Material Handler Machine Systems Boom Cylinder - Remove
C-9 Engines for Caterpillar Built Machines Engine Oil Pan
3524B Engine for Caterpillar Built Machines Pistons and Connecting Rods - Install
C15 and C18 Petroleum Generator Sets Engine Operation with Intermittent Diagnostic Codes
3114, 3116 and 3126 MUI Engine Governors Installation of Governor on 1U7326 Governor Calibration Bench
307B Excavator Machine Systems Blade Cylinder - Assemble
307B Excavator Quick Coupler Control - If Equipped
BP15 Pickup Broom Maintenance Interval Schedule
307B Excavator Implement Changing
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Oil Filter (Hydraulic, Return) - Install