Solenoid Valve (Counterweight Circuit) - Install
Installation Procedure
- Position solenoid valve (5) on the machine.
Show/hide table
Illustration 1 | g00612330 |
- Install bolts (6) .
- Connect hose assemblies (4) .
- Connect electrical connector (3) .
- Position access panel (2) on the machine. The weight of the access panel is 21 kg (46 lb). Install the washers and bolts (1) .
Show/hide table
Illustration 2 | g00612727 |
Caterpillar Information System:
C-9 Engines for Caterpillar Built Machines Water Temperature Regulator Housing
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Assemble
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Counterweight Cylinder - Disassemble
307B Excavator Machine System Specifications Boom - 3550 mm (139.8 inch)
307B Excavator Machine Systems Blade Cylinder - Install
345B, 345B Series II and W345B Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Disassemble
C-9 Engines for Caterpillar Built Machines Exhaust Manifold
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3126B Engines for Caterpillar Built Machines Housing (Front) - Remove
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Solenoid Valve (Counterweight Circuit) - Remove
307B Excavator Machine Systems Blade Cylinder - Remove
3524B Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
307B Excavator Machine System Specifications Relief Valve (Pilot)
307B Excavator Machine Systems Blade Cylinder - Disassemble
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove
3126B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
BP15 Pickup Broom Gutter Brush Adjustment
307B Excavator Blade Linkage - Lubricate
BP15 Pickup Broom Wire Bristle (Gutter Brush) - Inspect/Replace
3064 and 3066 Engines for Caterpillar Built Machines Camshaft Bearings - Install
307B Excavator Indicators and Gauges - Test
3126B and 3126E On-highway Engines Flywheel Housing - Remove and Install
307B Excavator Overload Warning Device