G3500 Engines Caterpillar


Thermostatic Valve - Install

Usage:

G3508 2TJ

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g01252049

  1. Position bracket (2) on thermostatic valve (4) and install bolts (5).


    Illustration 2g01252048

  2. Position thermostatic valve (4) and bracket (2) on the engine and install bolts (1).

  3. Install clamps (3).

  4. Connect the supply line to the auxiliary water pump.

Caterpillar Information System:

Electronic Modular Control Panel II (EMCP II) For PEEC Engines Sensors
G3500 Engines Thermostatic Valve - Remove
Electronic Modular Control Panel II (EMCP II) For PEEC Engines General Information
3512B and 3516B Engines Turbocharger
Electronic Modular Control Panel II (EMCP II) For PEEC Engines EMCP Electronic Control (Generator Set)
3406E and 3456 Generator Set Engines Water Temperature Regulator - Remove and Install
3406E and 3456 Generator Set Engines Coolant Temperature Sensor - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Component Location
3406E Marine Engine Circuit Breakers
3406E and 3456 Generator Set Engines Water Pump - Install
3500B Engines and 3500 Engines with EUI Option Electronic Display Module
3034 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3500B and 3500B High Displacement Generator Set Engines System Configuration Parameters
G3500 Engines Thermostatic Valve - Disassemble
G3500 Engines Thermostatic Valve - Assemble
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Rear Seal Carrier - If Equipped
3512B and 3516B Engines Air Inlet and Exhaust Lines
G3500 Engines Water Temperature Regulators - Remove
3406E and 3456 Generator Set Engines Engine Oil Cooler - Remove
3406E Truck Engines Piston and Rings
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Instrument Panel
G3500 Engines Water Temperature Regulators - Install
G3500 Engines Turbocharger - Remove
3034 Engine for Caterpillar Built Machines Engine Oil Pump - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.