Thermostatic Valve - Remove
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect the supply line to the auxiliary water pump. Plug all openings immediately.
Show/hide table
Illustration 1 g01252048 Typical example - Remove clamps (3).
- Remove bolts (1). Remove thermostatic valve (4) and bracket (2).
Show/hide table
Illustration 2 g01252049 - Remove bolts (5) and separate thermostatic valve (4) from bracket (2).
Caterpillar Information System:
Electronic Modular Control Panel II (EMCP II) For PEEC Engines General Information
3512B and 3516B Engines Turbocharger
Electronic Modular Control Panel II (EMCP II) For PEEC Engines EMCP Electronic Control (Generator Set)
3406E and 3456 Generator Set Engines Water Temperature Regulator - Remove and Install
3406E and 3456 Generator Set Engines Coolant Temperature Sensor - Remove and Install
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Component Location
3406E Marine Engine Circuit Breakers
3406E and 3456 Generator Set Engines Water Pump - Install
3500B Engines and 3500 Engines with EUI Option Electronic Display Module
3034 Engine for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
CIPI UNDERCARRIAGE Arrangements: 1667049, 2372904, 3Q6481, 6Z7988, 6Z7989, 9Q5032, 9Q5040, 9Q5043, 9Q5046, 9Q5047, 9Q5066, 9Q5074, 9Q5097, 9Q5098, 9Q5116, 9Q5134, 9Q5136, 9Q5142, 9Q5147, 9Q5148, 9Q5149, 9Q5172 and 9Q5204 Part Number Location
3500B and 3500B High Displacement Generator Set Engines Self-Diagnostics
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Sensors
G3500 Engines Thermostatic Valve - Install
3500B and 3500B High Displacement Generator Set Engines System Configuration Parameters
G3500 Engines Thermostatic Valve - Disassemble
G3500 Engines Thermostatic Valve - Assemble
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Rear Seal Carrier - If Equipped
3512B and 3516B Engines Air Inlet and Exhaust Lines
G3500 Engines Water Temperature Regulators - Remove
3406E and 3456 Generator Set Engines Engine Oil Cooler - Remove
3406E Truck Engines Piston and Rings
Electronic Modular Control Panel II (EMCP II) For PEEC Engines Instrument Panel
G3500 Engines Water Temperature Regulators - Install