The Filter/Fluid Information Message On The Operator Monitor May Not Display Correctly On Certain Excavators
Usage:
EXCAVATORS320C (AMC100-105, AMC107-112, AMC114-118, AMC120, AMC123-133, AMC136-142, AMC144-175, AMC177),
320C L (ANB121-373, ANB375-379, ANB381-392, ANB395-398, ANB410) EXCAVATORS
320C L (ANB121-373, ANB375-379, ANB381-392, ANB395-398, ANB410) EXCAVATORS
Problem:
The operator monitor may continuously display zero hours when the Filter/Fluid Information (FLTR/FLUID INFO) selection is activated at the main menu. The condition exists on certain machines that were shipped before the problem was corrected.
Solution:
If the operator monitor displays zero hours when the FLTR/FLUID INFO is selected, download new software from SIS (Service Information System) Web and flash the new software into the standard Electronic Control Module (ECM). The new 191-6922 Electronic Software is available on SIS Web. Refer to the service manual that is appropriate for your machine for the procedure to download and flash the new software.
Machines that are configured with the Electronic Technician (ET) Version of 3.1 or later will correctly display the FLTR/FLUID INFO.
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Pump Coupling Assembly Bolt Torque Increased On Wheeled Excavators Pump Coupling Assembly Bolt Torque Increased On Wheeled Excavators
Use Dry Nitrogen To Inflate Tires On Caterpillar Products Use Dry Nitrogen To Inflate Tires On Caterpillar Products
Drive Shaft Bending And/Or Breaking On Augers Drive Shaft Bending And/Or Breaking On Augers
168-6800 Pilot Pump Not Available For Product Support Program 168-6800 Pilot Pump Not Available For Product Support Program
Correct Orientation Of The Hub Of The KTR Coupling Correct Orientation Of The Hub Of The KTR Coupling
Engine Oil Filter Engine Oil Filter
Hydraulic Power Test For Akashi Built 320C Hydraulic Power Test For Akashi Built 320C
Electrical Changes In The Operation Of The Oscillating Axle And The Swing Brake Circuits With The M300 In Year 2000 Update Electrical Changes In The Operation Of The Oscillating Axle And The Swing Brake Circuits With The M300 In Year 2000 Update
Windshield Wiper Operation May Fail As A Result Of Excessive Tightening Of Mounting Hardware Windshield Wiper Operation May Fail As A Result Of Excessive Tightening Of Mounting Hardware
The Steering Cylinder Rods May Have Longitudinal Surface Cracks The Steering Cylinder Rods May Have Longitudinal Surface Cracks
Oil Cleanliness Tests Oil Cleanliness Tests
Modification To The Hydraulic Hose Assembly In The Pilot Lines Group Increases Durability Modification To The Hydraulic Hose Assembly In The Pilot Lines Group Increases Durability
THE CORRECT STARTING PROCEDURE WILL ALLOW THE ENGINE TO ATTAIN HIGH IDLE ON CERTAIN EXCAVATORS THE CORRECT STARTING PROCEDURE WILL ALLOW THE ENGINE TO ATTAIN HIGH IDLE ON CERTAIN EXCAVATORS
Procedure For The Adjustment of the Magnet Controller Settings On Certain Material Handlers Procedure For The Adjustment of the Magnet Controller Settings On Certain Material Handlers
Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette)) Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette))
The Correct Starting Procedure Will Allow The Engine To Attain High Idle On Certain Excavators The Correct Starting Procedure Will Allow The Engine To Attain High Idle On Certain Excavators
Modification To The Radiator Group Improves Access In Order To Remove Debris Modification To The Radiator Group Improves Access In Order To Remove Debris
Connecting Rod Bearings Connecting Rod Bearings
7S-5106 Chuck May Have Two Different Thread Engagements 7S-5106 Chuck May Have Two Different Thread Engagements
Releasing Pressure Gas In The Counterweight Shell Releasing Pressure Gas In The Counterweight Shell
Worn Bore in the Hydraulic Pump Regulator Block May Cause Inadvertant Implement Movement Even When the Hydraulic Lock Lever Is in the Locked-out Position Worn Bore in the Hydraulic Pump Regulator Block May Cause Inadvertant Implement Movement Even When the Hydraulic Lock Lever Is in the Locked-out Position
Hydraulic Oil Cooler Identification Hydraulic Oil Cooler Identification
Reconnecting The 166-0294 Wiring Harness To The Solenoid Valves For Cold Planers Reconnecting The 166-0294 Wiring Harness To The Solenoid Valves For Cold Planers