7S-5106 Chuck May Have Two Different Thread Engagements
Usage:
OFF-HIGHWAY TRUCKALL OFF-HIGHWAY TRUCKS
Problem:
Two different 7S-5106 Air/Nitrogen Chucks have been released into the Caterpillar Parts System.
Solution:
Illustration 1 shows the two 7S-5106 Air/Nitrogen Chucks that have the two different thread engagements. The chucks with the threads that are below the entry of the port are NOT RECOMMENDED for use on Off-Highway Trucks. The chucks with the threads that are at the entry of the port are of the older style and are acceptable for use on Off-Highway Trucks.
7S-5106 Air/Nitrogen Chucks with the two different thread engagements.
Illustration 1.
The newer style chucks with the threads that are below the entry of the port are NOT RECOMMENDED for use on Off-Highway Trucks. The older style chucks have the threads that are at the entry of the port are of the older style and are acceptable for use on Off-Highway Trucks.
COPYRIGHT 2000 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar Information System:
Connecting Rod Bearings Connecting Rod Bearings
Modification To The Radiator Group Improves Access In Order To Remove Debris Modification To The Radiator Group Improves Access In Order To Remove Debris
The Correct Starting Procedure Will Allow The Engine To Attain High Idle On Certain Excavators The Correct Starting Procedure Will Allow The Engine To Attain High Idle On Certain Excavators
Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette)) Lights Flashing On New Caterpillar Radios (173-6530 Radio Group (AM/FM/WB) And 173-6532 Radio Group (AM/FM Cassette))
Procedure For The Adjustment of the Magnet Controller Settings On Certain Material Handlers Procedure For The Adjustment of the Magnet Controller Settings On Certain Material Handlers
THE CORRECT STARTING PROCEDURE WILL ALLOW THE ENGINE TO ATTAIN HIGH IDLE ON CERTAIN EXCAVATORS THE CORRECT STARTING PROCEDURE WILL ALLOW THE ENGINE TO ATTAIN HIGH IDLE ON CERTAIN EXCAVATORS
Modification To The Hydraulic Hose Assembly In The Pilot Lines Group Increases Durability Modification To The Hydraulic Hose Assembly In The Pilot Lines Group Increases Durability
The Filter/Fluid Information Message On The Operator Monitor May Not Display Correctly On Certain Excavators The Filter/Fluid Information Message On The Operator Monitor May Not Display Correctly On Certain Excavators
Testing The Function Of The 3E6477 Relay Assembly (24 Volt) Testing The Function Of The 3E6477 Relay Assembly (24 Volt)
Pump Coupling Assembly Bolt Torque Increased On Wheeled Excavators Pump Coupling Assembly Bolt Torque Increased On Wheeled Excavators
Use Dry Nitrogen To Inflate Tires On Caterpillar Products Use Dry Nitrogen To Inflate Tires On Caterpillar Products
Drive Shaft Bending And/Or Breaking On Augers Drive Shaft Bending And/Or Breaking On Augers
Releasing Pressure Gas In The Counterweight Shell Releasing Pressure Gas In The Counterweight Shell
Worn Bore in the Hydraulic Pump Regulator Block May Cause Inadvertant Implement Movement Even When the Hydraulic Lock Lever Is in the Locked-out Position Worn Bore in the Hydraulic Pump Regulator Block May Cause Inadvertant Implement Movement Even When the Hydraulic Lock Lever Is in the Locked-out Position
Hydraulic Oil Cooler Identification Hydraulic Oil Cooler Identification
Reconnecting The 166-0294 Wiring Harness To The Solenoid Valves For Cold Planers Reconnecting The 166-0294 Wiring Harness To The Solenoid Valves For Cold Planers
TRANSMISSION HOUSING OVERFILLS TRANSMISSION HOUSING OVERFILLS
Failure Of The Shaft For The Pilot Pump Failure Of The Shaft For The Pilot Pump
The Brakes Of The D-Series Backhoe Loader The Brakes Of The D-Series Backhoe Loader
Reconnecting The 166-0294 Wiring Harness To the Solenoid Valves For The SG16 And SG18 Stump Grinders Reconnecting The 166-0294 Wiring Harness To the Solenoid Valves For The SG16 And SG18 Stump Grinders
Do Not Use Blue 7K-9220 Seals In The 150-1543 Spring Coupling On 5230 Excavators Do Not Use Blue 7K-9220 Seals In The 150-1543 Spring Coupling On 5230 Excavators
BOOM REINFORCEMENT PLATES BOOM REINFORCEMENT PLATES
Hydraulic Pressure Does Not Build Up In The Main Hydraulic Pump Hydraulic Pressure Does Not Build Up In The Main Hydraulic Pump
Adjusting The Parameters Of The Autoshift Transmission Adjusting The Parameters Of The Autoshift Transmission