PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR BASE ON CERTAIN H75E AND H95E HAMMERS
Usage:
TEBE0842-00
Show/hide table
| 21Feb2014 |
U-101
A-72
D-90
O-86
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR BASE ON CERTAIN H75E AND H95E HAMMERS |
|
| 6333 5077 | PS52621 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52621" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 29Feb2016 |
PROBLEM
Show/hide table
| The existing 369-1025 Accumulator Base can cause an oil or nitrogen leak around the accumulator cover on certain H75E and H95E Hammers. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| H75E S | X9E00100-00101, 103-198, 200-232, 235-247, 250-376, 379-421, 424-572 |
| HE95E S | X9F00100, 102-303, 305-335 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 3867076 | MEMBRANE-ACCUM |
| 1 | 3943905 | SEAL-O-RING |
| 1 | 4481108 | BASE |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 1% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| If the existing 369-1025 Accumulator Base fails, replace it with the new 448-1108 Accumulator Base. Replace the 386-7076 Membrane and 394-3905 O-Ring on the new 448-1108 Accumulator Base before installation. Refer to Disassembly and Assembly, "Hydraulic Hammer - Disassemble" and "Hydraulic Hammer - Assemble" for instructions on removing and installing the accumulator base. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-12 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRIORITY POPPET VALVE ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRIORITY POPPET VALVE ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HEATER HOSE ON CERTAIN 306E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HEATER HOSE ON CERTAIN 306E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 330D, 336D, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 330D, 336D, AND 390D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN EXCAVATORS, WHEEL LOADERS, TRACK TYPE TRACTORS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ASPHALT PAVERS, AND WHEEL FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN EXCAVATORS, WHEEL LOADERS, TRACK TYPE TRACTORS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ASPHALT PAVERS, AND WHEEL FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR FLUSHING THE COOLANT SYSTEM ON CERTAIN 314D LCR, 321D CR, AND 321D LCR EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR FLUSHING THE COOLANT SYSTEM ON CERTAIN 314D LCR, 321D CR, AND 321D LCR EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORK OF THE 294-1287 STICK ASSEMBLY ON CERTAIN 374D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORK OF THE 294-1287 STICK ASSEMBLY ON CERTAIN 374D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN D8T TRACK-TYPE TRACTORS, 740B ARTICULATED TRUCKS, 336E, AND 349E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE SOFTWARE ON CERTAIN D8T TRACK-TYPE TRACTORS, 740B ARTICULATED TRUCKS, 336E, AND 349E EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN BOLTS FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN BOLTS FROM DEALER PART STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ADJUSTMENT SCREW ON CERTAIN B35 HYDRAULIC HAMMERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ADJUSTMENT SCREW ON CERTAIN B35 HYDRAULIC HAMMERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE PRESSURE RELIEF VALVE ON CERTAIN MP324 MULTI-PROCESSORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE PRESSURE RELIEF VALVE ON CERTAIN MP324 MULTI-PROCESSORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM EXTENSION CUSHION STOP (SNUBBER) ON CERTAIN 336D LARGE EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM EXTENSION CUSHION STOP (SNUBBER) ON CERTAIN 336D LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RECOIL SPRING GROUP ON CERTAIN 324D AND 324DL EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RECOIL SPRING GROUP ON CERTAIN 324D AND 324DL EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE MACHINE, MONITOR, AND ENGINE SOFTWARE ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE MACHINE, MONITOR, AND ENGINE SOFTWARE ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALTERNATOR HARNESS ON CERTAIN 308E AND 308E 2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALTERNATOR HARNESS ON CERTAIN 308E AND 308E 2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SIGNAL RELIEF VALVE ON CERTAIN 374D L, 390D L, 374D OEM, AND 390D L OEM HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SIGNAL RELIEF VALVE ON CERTAIN 374D L, 390D L, 374D OEM, AND 390D L OEM HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR SWASHPLATE ON CERTAIN 305.5E, 306, AND 306E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR SWASHPLATE ON CERTAIN 305.5E, 306, AND 306E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 349E EXCAVATOR PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 349E EXCAVATOR
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN 324E, AND 329E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN 324E, AND 329E EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN 924K, 930K, 938K, 950K, AND 962K WHEEL LOADERS, 312E, 314E, 316E, 320E, 324E,AND 329E EXCAVATORS, AND D6N TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN 924K, 930K, 938K, 950K, AND 962K WHEEL LOADERS, 312E, 314E, 316E, 320E, 324E,AND 329E EXCAVATORS, AND D6N TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES ON CERTAIN CATERPILLAR PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL HARNESS ON CERTAIN 336D 2, 336D 2L, AND 340D 2L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL HARNESS ON CERTAIN 336D 2, 336D 2L, AND 340D 2L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER ON CERTAIN M313D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER ON CERTAIN M313D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 360-8928 HARNESS ASSEMBLY ON CERTAIN M313D AND M315D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 360-8928 HARNESS ASSEMBLY ON CERTAIN M313D AND M315D WHEELED EXCAVATORS