PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES ON CERTAIN CATERPILLAR PRODUCTS Caterpillar


PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES ON CERTAIN CATERPILLAR PRODUCTS

Usage:

TEBE0893-00

11Mar2014


U-132
A-97
O-116

 

Priority

  
  

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES ON CERTAIN CATERPILLAR PRODUCTS

7405 7557
PI32315
NOTE:

This Program must be administered as soon as possible. When reporting the repair, use "PI32315" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32315" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.


COMPLETION DATE

TERMINATION DATE

30Sep2014 31Mar2015

PROBLEM

The existing emissions labels on certain reman C4.4 and C6.6 replacement engines on certain Caterpillar Products do not meet requirements because they are able to be removed without significant damage to the label and may lead to confusion about if the engine is compliant with US emissions standards.

AFFECTED PRODUCT

Model Identification Number
*******Group  1*******
420E PHC00429

PRA00928, 1600, 1769
420E PL  DAN01118, 1262, 1418, 1496, 1516, 1709
420E ST  DJL00459, 484, 711, 975, 2170, 2244, 2376, 2403, 2473, 2490, 2559, 3043, 3371
430E IT  MXB00412
924H  HXC00417, 1574, 2112, 2532
924H Z  PED00798
928H  CXK01465, 1594
930H  DHC00283, 648, 730, 2068, 2921, 3001, 3225
938G  4YS01222
938H  MJC00168, 311, 865, 869, 1397
D3K LGP  LLL00971
D4K LGP  RRR00239
D4K XL  MMM00151, 180
D5G XL  FDH00904
D5K LGP  YYY00159, 414, 525, 544, 572, 580, 690, 1348, 1429, 1497
D5K XL  WWW00142, 251, 320, 322
IT38H  JNJ00168, 212
M318D  W8P05243
M322D  W2S00380
*******Group  2*******
120M  D9W00149
12M B9F00098, 840

B9R00052
14M  B9J00516
963D  LCS00388, 424, 444, 1017, 1477
CP56  C5P00116, 362, 676
CS54  C5R00167
CS56  C5S00221, 432, 488, 541, 1113, 1169, 1207, 1576
CS64  C6S00101, 130
CS74  C8S00117
D6K LGP  DHA00494, 603, 644, 972, 1341
D6K XL  FBH00366, 505, 799, 965, 1017, 1651, 1830
D6N LGP  DJY00202, 220, 329, 411, 418, 429, 456, 533, 626, 849, 964, 1011, 1209, 1661, 1681, 1685, 1719
D6N XL  DJA00355, 372, 563, 609, 776

PARTS NEEDED

Qty

Part Number Description
*******Group 1*******
1 LABEL1 EMISSION LABEL 1
1 LABEL2 EMISSION LABEL 2
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 40% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

*******Group 2*******
1 LABEL1 EMISSION LABEL 1
1 LABEL2 EMISSION LABEL 2
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 40% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.


ACTION REQUIRED

If there is a machine that is not listed in the Affected Product and suspect that it needs replacement labels for the reman replacement engine, please contact the Reman Help Line with the following information:

Dealer Code
Dealer Contact Name
Phone Number
Shipping Address for the label
Reman Engine Serial Number
Machine Serial Number the Engine is installed into

Reman Help Line Contact Information:

E-mail: reman_help@cat.com
Phone: 1(888)88-REMAN (1(888)887-3626)

Labels are engine serial number specific and will be shipped when we have all the information.

Refer to the attached rework procedure for where the labels get attached to the engine and how to remove old labels.

OWNER NOTIFICATION

Owners in the following countries will receive the attached Owner Notification:
US
Canada

SERVICE CLAIM ALLOWANCES

Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 1*******
100%
100%
0%
0%
0%
0%
 NOTE: This is a 2.0-hour job for Group 1

Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 2*******
100%
100%
0%
0%
0%
0%

 NOTE: This is a 2.0-hour job for Group 2


PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
 
 
 
EXAMPLE COPY OF OWNER NOTIFICATION

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABELS ON CERTAIN REMAN REPLACEMENT ENGINES

MODELS INVOLVED - 420E, 430E, IT38H, 924H, 928H, 930H, 938G, 938H, D3K, D4K, D5G, D5K, D6K, D6N, M318D, M322D, 120M, 12M, 14M, 963D, CP56, CS54, CS56, CS64, CS74


Dear Cat Product Owner:


The Reman replacement engine installed in a Cat machine needs to have the emissions label replaced on the products listed below. The existing emissions label can cause confusion about if the engine is emissions compliant. You will not be charged for the service performed.

Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.

If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated. Please refer the dealer to their Service Letter dated 11Mar2014 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.



Caterpillar Inc.

Identification #(s)



Attached to 11Mar2014 Service Letter


Rework Procedure


 
Example of the new C4.4 and C6.6 labels.
Image1.1.1
 
Locations of the current labels and where to install the new labels.
Image1.2.1
Image1.2.2
Image1.2.3
 
Emission label check and removal process.

Recommended tools: Heat gun and Blunt Scraper

1. Confirm the engine serial number and the replacement label have the same serial number. If not contact the reman help line.

2. Check the engines for the locations of the emissions labels. Locations found above.

3. Using a heat gun gently heat the entire label by holding the gun 3-4 inches (7 to 10 cm) away from the label. The label should not get so hot that you cannot touch it.

4. Using a blunt scraper lift a corner of the label.

5. The label should be pliable once heat has been applied so gently remove the rest of the label - be sure to do this quickly as the label will get cold again making it more difficult to remove. Note: the label won't always come off in one piece but if it is proving particularly difficult to remove use more heat to warm it up.

6. Once the emissions label has been removed, check the area for any excess glue or dirt. Please clean the area with the supplied wipes.

7. Fit the replacement label in the same area.

8. Repeat the actions above for both labels.
 
 

Caterpillar Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN 924K, 930K, 938K, 950K, AND 962K WHEEL LOADERS, 312E, 314E, 316E, 320E, 324E,AND 329E EXCAVATORS, AND D6N TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GLOW PLUGS ON CERTAIN 924K, 930K, 938K, 950K, AND 962K WHEEL LOADERS, 312E, 314E, 316E, 320E, 324E,AND 329E EXCAVATORS, AND D6N TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN 324E, AND 329E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN 324E, AND 329E EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 349E EXCAVATOR PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 349E EXCAVATOR
PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR SWASHPLATE ON CERTAIN 305.5E, 306, AND 306E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE TRAVEL MOTOR SWASHPLATE ON CERTAIN 305.5E, 306, AND 306E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SIGNAL RELIEF VALVE ON CERTAIN 374D L, 390D L, 374D OEM, AND 390D L OEM HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SIGNAL RELIEF VALVE ON CERTAIN 374D L, 390D L, 374D OEM, AND 390D L OEM HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALTERNATOR HARNESS ON CERTAIN 308E AND 308E 2 MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALTERNATOR HARNESS ON CERTAIN 308E AND 308E 2 MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSTALLING A CRANKCASE BREATHER HEATER KIT ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE MACHINE, MONITOR, AND ENGINE SOFTWARE ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE MACHINE, MONITOR, AND ENGINE SOFTWARE ON CERTAIN 308E 2 CR MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR BASE ON CERTAIN H75E AND H95E HAMMERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ACCUMULATOR BASE ON CERTAIN H75E AND H95E HAMMERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRIORITY POPPET VALVE ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRIORITY POPPET VALVE ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HEATER HOSE ON CERTAIN 306E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HEATER HOSE ON CERTAIN 306E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 330D, 336D, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE ON CERTAIN 330D, 336D, AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL HARNESS ON CERTAIN 336D 2, 336D 2L, AND 340D 2L EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL HARNESS ON CERTAIN 336D 2, 336D 2L, AND 340D 2L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER ON CERTAIN M313D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BUCKET CYLINDER ON CERTAIN M313D WHEELED EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 360-8928 HARNESS ASSEMBLY ON CERTAIN M313D AND M315D WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 360-8928 HARNESS ASSEMBLY ON CERTAIN M313D AND M315D WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY UPDATING THE HYDRAULIC CONFIGURATION FOR THE QUICK COUPLER ON CERTAIN 336D AND 336E EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY UPDATING THE HYDRAULIC CONFIGURATION FOR THE QUICK COUPLER ON CERTAIN 336D AND 336E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR THE REPAINTING OF SOME COMPONENTS ON CERTAIN 323D AND 323E EXCAVATORS PRODUCT SUPPORT PROGRAM FOR THE REPAINTING OF SOME COMPONENTS ON CERTAIN 323D AND 323E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWING SPOOL ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE SWING SPOOL ON CERTAIN 307E MINI HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 320E AND 323E EXCAVATORS PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 320E AND 323E EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 324E AND 329E EXCAVATORS PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 324E AND 329E EXCAVATORS
PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 336E EXCAVATORS PRODUCT SUPPORT PROGRAM TO REWORK THE CAT GRADE CONTROL CONFIGURATION FOR THE GNSS RECEIVER ON CERTAIN 336E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 390D AND 385C FS EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TANK ON CERTAIN 390D AND 385C FS EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PISTON SKIRTS FROM DEALER PARTS STOCK AND INSPECTING AND POSSIBLY REWORKING CERTAIN 3456 AND C-16 CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PISTON SKIRTS FROM DEALER PARTS STOCK AND INSPECTING AND POSSIBLY REWORKING CERTAIN 3456 AND C-16 CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 390D L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 390D L EXCAVATORS
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.