PRODUCT IMPROVEMENT PROGRAM FOR CHECKING THE TORQUE VALUE OF THE COUNTERWEIGHT MOUNTING BOLTS ON CERTAIN 320D EXCAVATORS
Usage:
REBE7681-00
Show/hide table
| 28Oct2011 |
D-415
Show/hide table
| Safety | PRODUCT IMPROVEMENT PROGRAM FOR CHECKING THE TORQUE VALUE OF THE COUNTERWEIGHT MOUNTING BOLTS ON CERTAIN 320D EXCAVATORS |
|
| 7056 | PI10875 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible.
When reporting the repair, use "PI10875" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim
Description Code and "T" as the SIMS Description Code.
|
Show/hide table
Show/hide table
Show/hide table
Show/hide table
PROBLEM
Show/hide table
| The 7X-2583 Counterweight Mounting Bolts may become loose on certain 320D Excavators. If the problem can not been detected earlier, the counterweight may fall off and cause possible personal injury. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 320D | BZP01144-01643 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Use 1400 N.m static inspection torque value in order to check the four 7X-2583 Bolts for the listed affected machines. If any loose bolts are detected, torque the four 7X-2583 Bolts to 1600 N.m. Refer to RENR7293, Specifications, "320D Excavator Machine System Specifications". |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 SAFETY - PRODUCT IMPROVEMENT PROGRAM FOR CHECKING THE TORQUE VALUE OF THE COUNTERWEIGHT MOUNTING BOLTS ON CERTAIN EXCAVATORS MODELS INVOLVED - 320D Excavators Dear Caterpillar Product Owner: The 7X-2583 Counterweight Bolts needs to be torque inspected on the products listed below. The existing bolts can become loose and lead to the counterweight falling off, which may, in conjunction with other factors or circumstances, result in a risk of personal injury or death. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 28Oct2011 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction. Caterpillar Inc. Identification #(s) Attached to 28Oct2011 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK CELLULAR ANTENNA ON CERTAIN MACHINES PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK CELLULAR ANTENNA ON CERTAIN MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE 8T-4223 WASHER TO THE 354-3506 GEAR PUMP AND MOUNTING GROUP (GRAPPLE ROTATE) ON CERTAIN 568LL EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE 8T-4223 WASHER TO THE 354-3506 GEAR PUMP AND MOUNTING GROUP (GRAPPLE ROTATE) ON CERTAIN 568LL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TRACK ADJUSTMENT GROUP ON CERTAIN 336D, 345D, 365C, 374D, 385C, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC TRACK ADJUSTMENT GROUP ON CERTAIN 336D, 345D, 365C, 374D, 385C, AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 374D AND 390D EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE BOOM LOWERING CHECK VALVES ON CERTAIN 374D AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN 336E AND 349E EXCAVATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN 336E AND 349E EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 352-6061 LINER SEALS FOR 3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING, AND IF NEEDED, REWORKING THE DIFFERENTIAL RELIEF VALVE ON CERTAIN 385C FS, 374D, AND 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR INSPECTING, AND IF NEEDED, REWORKING THE DIFFERENTIAL RELIEF VALVE ON CERTAIN 385C FS, 374D, AND 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS AND 336E AND 349E HYDRAULIC EXCAVATORS, AND 568 FOREST PRODUCTS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN 966K, 972K, AND 980K WHEEL LOADERS AND 336E AND 349E HYDRAULIC EXCAVATORS, AND 568 FOREST PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOUNTING GROUP ON CERTAIN H25D HYDRAULIC HAMMERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE MOUNTING GROUP ON CERTAIN H25D HYDRAULIC HAMMERS
PRODUCT SUPPORT PROGRAM FOR DISPENSING FUEL SYSTEM CLEANER ON VARIOUS 311D, 312D, 314D, 315D, 319D, 320D, 321D, AND 323D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR DISPENSING FUEL SYSTEM CLEANER ON VARIOUS 311D, 312D, 314D, 315D, 319D, 320D, 321D, AND 323D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 349E EXCAVATORS, D8T TRACK-TYPE TRACTORS, 735B, 740B ARTICULATED TRUCKS, 980K WHEEL LOADERS, C15, AND C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE NRS COOLER ON CERTAIN 349E EXCAVATORS, D8T TRACK-TYPE TRACTORS, 735B, 740B ARTICULATED TRUCKS, 980K WHEEL LOADERS, C15, AND C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE INTERFERENCE BETWEEN THE 306-8777 HARNESS AND THE 310-9498/310-9500 ENGINE OIL HOSE GROUP ON CERTAIN 320D AND 323D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR CHECKING THE INTERFERENCE BETWEEN THE 306-8777 HARNESS AND THE 310-9498/310-9500 ENGINE OIL HOSE GROUP ON CERTAIN 320D AND 323D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FINAL DRIVE ON CERTAIN 324D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FINAL DRIVE ON CERTAIN 324D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC CONTROL LINES AND EXTERNAL METAL PLATES ON CERTAIN 320D FM EXCAVATORS EQUIPPED WITH A HARVESTER CONTROLLER ARRANGEMENT PRODUCT SUPPORT PROGRAM FOR REWORKING THE HYDRAULIC CONTROL LINES AND EXTERNAL METAL PLATES ON CERTAIN 320D FM EXCAVATORS EQUIPPED WITH A HARVESTER CONTROLLER ARRANGEMENT
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER ON CERTAIN 307D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER ON CERTAIN 307D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 341-7668 FINAL DRIVE GROUP ON CERTAIN 306 EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 341-7668 FINAL DRIVE GROUP ON CERTAIN 306 EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REGISTERING PRODUCT LINK THAT WERE DEREGISTERED ON VARIOUS PRODUCTS PRODUCT SUPPORT PROGRAM FOR REGISTERING PRODUCT LINK THAT WERE DEREGISTERED ON VARIOUS PRODUCTS
PRODUCT IMPROVEMENT PROGRAM FOR REGISTERING PRODUCT LINK THAT WERE DEREGISTERED ON CERTAIN ARTICULATED TRUCKS, BACKHOE LOADERS, EXCAVATORS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, MOTOR GRADERS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, WHEEL LO PRODUCT IMPROVEMENT PROGRAM FOR REGISTERING PRODUCT LINK THAT WERE DEREGISTERED ON CERTAIN ARTICULATED TRUCKS, BACKHOE LOADERS, EXCAVATORS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, MOTOR GRADERS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, WHEEL LO
PRODUCT SUPPORT PROGRAM FOR REWORKING THE PIN BOSS FOR BUCKETS ON CERTAIN 390D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE PIN BOSS FOR BUCKETS ON CERTAIN 390D EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN 336E EXCAVATORS, D6T, D7E TRACK-TYPE TRACTORS, 140M SERIES 2, 160M SERIES 2 MOTOR GRADERS, 966K, 972K WHEEL LOADERS, AND 568 FOREST PRODUCTS PRODUCT IMPROVEMENT PROGRAM INSPECT AND POSSIBLY REPLACE THE NRS COOLER ON CERTAIN 336E EXCAVATORS, D6T, D7E TRACK-TYPE TRACTORS, 140M SERIES 2, 160M SERIES 2 MOTOR GRADERS, 966K, 972K WHEEL LOADERS, AND 568 FOREST PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOOM ASSEMBLY ON CERTAIN 320D, 320D L, 320D LRR, 320D LN, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324E LN, 328D, 328D LCR, AND 329D L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ON CERTAIN 345C, 345D, AND 349D EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIATOR CORE ON CERTAIN 345C, 345D, AND 349D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING DRIVE GROUP ON CERTAIN M322C MH AND M322D MH WHEELED EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING DRIVE GROUP ON CERTAIN M322C MH AND M322D MH WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY INSTALLING A PISTON PIN RETAINER ON 0R1570, 0R1571, 0R1572, 0R2861, 0R8915, 0R9393, 10R4401, 10R8409, AND 10R8616 CYLINDER KITS IN DEALER PARTS STOCK