Ripper Lift Cylinder - Remove and Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 154-6182 | Forcing Bolt | 2 |
- Lower ripper assembly (1) until secure on a level surface.
Show/hide table
Illustration 2 g06322883 - Ensure that cylinder group (2) is not at the end of travel and that at least
13 mm (0.5 inch) of the chrome shaft is visible.Show/hide tableIllustration 3 g06322887 - Disconnect hose assembly (3).
Show/hide table
Illustration 4 g06324122 - Remove bolt (4) and the washer. Position hose assembly (5) out of the way.
- Disconnect hose assembly (8). Remove bolts (7) and position plate (6) out of the way.
Show/hide table
Illustration 5 g06324142 - Attach suitable lifting device to cylinder group (2). The weight of cylinder group (2) is approximately
98 kg (216 lb) .Show/hide tableIllustration 6 g06324148 - Remove two bolts (10) and bar (9).
- Disconnect hose assembly (13) and remove fitting (12). Remove pin (11).
Show/hide table
Illustration 7 g06324154 - Disconnect hose assembly (17) and remove fitting (16). Remove two plugs (18).
- Remove four bolts (15) from trunnion (14).
Show/hide table
Illustration 8 g06324169 - Use Tooling (A) to loosen and remove trunnion (14).
Show/hide table
Illustration 9 g06324174 - Remove bearing (19) from trunnion (14).
- Repeat steps 10 through 12 for the other side.
Show/hide table
Illustration 10 g06324180 - Use suitable lifting device to remove cylinder group (2). The weight of cylinder group (2) is approximately
98 kg (216 lb) .
Show/hide table
Illustration 1 | g06322875 |
- Install cylinder group (2) in the reverse order of removal.
Caterpillar Information System:
New Cylinder Liner is Now Used on Certain C32 Machine Engines {1216} New Cylinder Liner is Now Used on Certain C32 Machine Engines {1216}
24N Motor Graders Information Display Operator Menu
Certain Cat® Product Link Assets Available For Subscription May Appear Incorrectly In Dealer Service Portal Dashboard {7606} Certain Cat® Product Link Assets Available For Subscription May Appear Incorrectly In Dealer Service Portal Dashboard {7606}
New Support Groups for Wide Width Packages are Available on Certain SE50 VT Asphalt Screeds {6641} New Support Groups for Wide Width Packages are Available on Certain SE50 VT Asphalt Screeds {6641}
Installation Procedure for Upgraded Mainframe Endcaps and Extender Deflectors on Certain SE60V XW Screeds {6640} Installation Procedure for Upgraded Mainframe Endcaps and Extender Deflectors on Certain SE60V XW Screeds {6640}
MD6200 Rotary Drill Lifting and Tying Down the Machine
Procedure for Installation of High Intensity Lights on Certain 700 Series Articulated Trucks {1429, 1433, 1434} Procedure for Installation of High Intensity Lights on Certain 700 Series Articulated Trucks {1429, 1433, 1434}
950M and 962M Wheel Loaders Engine Oil and Filter - Change
MD6200 Rotary Drill Maintenance Interval Schedule
Single Configuration Files May Not Load on Certain Cat® Product Link Elite (PLE601) Network Managers {7606} Single Configuration Files May Not Load on Certain Cat® Product Link Elite (PLE601) Network Managers {7606}
Product Link ™ Pro PL641 and PL631 Systems Security System Tamper Resistant Configuration - Disable
New Software Version Is Now Available for Cat® Terrain Office {7605} New Software Version Is Now Available for Cat® Terrain Office {7605}
24 Motor Grader Systems Bearing End Play (Piston Pump) - Adjust
Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030} Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030}
Tightening Procedure for the Bolt of the Drive Shaft Group Is Now Used on Certain 563D and 573D Wheel Feller Bunchers {3251, 3253} Tightening Procedure for the Bolt of the Drive Shaft Group Is Now Used on Certain 563D and 573D Wheel Feller Bunchers {3251, 3253}
24 Motor Grader Systems Pump Control Valve (Implement, Steering) - Test and Adjust
The Air Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1051, 1054, 1071} The Air Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1051, 1054, 1071}
R1700 Load Haul Dump Tire Pressure Monitoring System Sensor - Set
Updated Software Release Is Now Available For Cat® Product Link (PL542) Devices {7606} Updated Software Release Is Now Available For Cat® Product Link (PL542) Devices {7606}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Prepare the Machine for Maintenance
Updated Tandem Walkways are Now Available for Certain Motor Graders {7255} Updated Tandem Walkways are Now Available for Certain Motor Graders {7255}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) System Pressure Release
An Internal Software Issue of the Latest Monitor Software Results in No Buzzer Sounding on Certain Wheeled Excavators and Material Handlers {7490} An Internal Software Issue of the Latest Monitor Software Results in No Buzzer Sounding on Certain Wheeled Excavators and Material Handlers {7490}
Installation of Electrical Harness for the Forestry Machine C7.1 Cold Climate Kit {1408} Installation of Electrical Harness for the Forestry Machine C7.1 Cold Climate Kit {1408}