The Air Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1051, 1054, 1071} Caterpillar


The Air Lines Group is Improved on Certain 794 AC Off-Highway Trucks {1051, 1054, 1071}

Usage:

794 AC MN5
Off-Highway Truck/Tractor
794 AC (S/N: MN51-UP; MT51-137)

Description Of Change: The air lines group is now improved on the machines listed above. The air lines group has new turbo inlet clamps that are larger in diameter. The new clamps improve the serviceability and service life of the hose assemblies.

Adaptable To:

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.




Illustration 1g06324749
442-2540 Air Cleaner Gp
(1) 233-8483 Clamps
(2) 231-3264 Clamps

Table 1
Required Parts 
Item  Qty  New Part Number  Part Name  Former Part Number (1) 
233-8483  Clamp  431-8539 
231-3264  Clamp  431-8541 
(1) The former part number listed is for reference only and may differ.
New 233-8483 Clamp (1) replaces the former 431-8539 Clamp in the 442-2540 Air Cleaner Gp.

New 231-3264 Clamp (2) replaces the former 431-8541 Clamp in the 442-2540 Air Cleaner Gp.

New clamp (1) and clamp (2) are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers.

Caterpillar Information System:

24 Motor Grader Systems Pump Control Valve (Implement, Steering) - Test and Adjust
Tightening Procedure for the Bolt of the Drive Shaft Group Is Now Used on Certain 563D and 573D Wheel Feller Bunchers {3251, 3253} Tightening Procedure for the Bolt of the Drive Shaft Group Is Now Used on Certain 563D and 573D Wheel Feller Bunchers {3251, 3253}
Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030} Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030}
24 Motor Grader Systems Bearing End Play (Piston Pump) - Adjust
24 Motor Grader Machine Systems Ripper Lift Cylinder - Remove and Install
New Cylinder Liner is Now Used on Certain C32 Machine Engines {1216} New Cylinder Liner is Now Used on Certain C32 Machine Engines {1216}
24N Motor Graders Information Display Operator Menu
Certain Cat® Product Link Assets Available For Subscription May Appear Incorrectly In Dealer Service Portal Dashboard {7606} Certain Cat® Product Link Assets Available For Subscription May Appear Incorrectly In Dealer Service Portal Dashboard {7606}
New Support Groups for Wide Width Packages are Available on Certain SE50 VT Asphalt Screeds {6641} New Support Groups for Wide Width Packages are Available on Certain SE50 VT Asphalt Screeds {6641}
Installation Procedure for Upgraded Mainframe Endcaps and Extender Deflectors on Certain SE60V XW Screeds {6640} Installation Procedure for Upgraded Mainframe Endcaps and Extender Deflectors on Certain SE60V XW Screeds {6640}
MD6200 Rotary Drill Lifting and Tying Down the Machine
Procedure for Installation of High Intensity Lights on Certain 700 Series Articulated Trucks {1429, 1433, 1434} Procedure for Installation of High Intensity Lights on Certain 700 Series Articulated Trucks {1429, 1433, 1434}
R1700 Load Haul Dump Tire Pressure Monitoring System Sensor - Set
Updated Software Release Is Now Available For Cat® Product Link (PL542) Devices {7606} Updated Software Release Is Now Available For Cat® Product Link (PL542) Devices {7606}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Prepare the Machine for Maintenance
Updated Tandem Walkways are Now Available for Certain Motor Graders {7255} Updated Tandem Walkways are Now Available for Certain Motor Graders {7255}
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) System Pressure Release
An Internal Software Issue of the Latest Monitor Software Results in No Buzzer Sounding on Certain Wheeled Excavators and Material Handlers {7490} An Internal Software Issue of the Latest Monitor Software Results in No Buzzer Sounding on Certain Wheeled Excavators and Material Handlers {7490}
Installation of Electrical Harness for the Forestry Machine C7.1 Cold Climate Kit {1408} Installation of Electrical Harness for the Forestry Machine C7.1 Cold Climate Kit {1408}
24 Motor Grader Machine Systems Control Manifold (Pilot Shutoff) - Remove and Install
Product Link ™ Elite PLE641 and PLE631 Systems Security System Tamper Resistant Configuration - Disable
Procedure to Replace Windscreen on Certain 740 Ejector and 745 Articulated Trucks {7310, 7340} Procedure to Replace Windscreen on Certain 740 Ejector and 745 Articulated Trucks {7310, 7340}
24 Motor Grader Machine Systems Control Manifold (Brakes) - Remove and Install
The Plate Supporting the Cooling Lines Group at the Engine Cylinder Head May Fail Prematurely on Certain 559D, 579D, 2384D, and 2484D Knuckleboom Loaders {1071, 1380, 5057} The Plate Supporting the Cooling Lines Group at the Engine Cylinder Head May Fail Prematurely on Certain 559D, 579D, 2384D, and 2484D Knuckleboom Loaders {1071, 1380, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.