Updated Predelivery/Revisit Checklists Are Now Used Caterpillar


Updated Predelivery/Revisit Checklists Are Now Used

Usage:

Updated Predelivery/Revisit Checklists Are Now Used

CONFIDENTIAL TIBU3688-00

TECHNICAL INFORMATION BULLETIN

October 02, 2002

Earthmoving Compactor - All

Track-Type Tractor - All

Track-Type Loader - All

Pipelayer - All

Wheel Tractor-Scraper - All

Motor Grader - All

Excavator - All

Forest Products - All

Wheel Loader - All

Wheel Tractor - All

Wheel Skidder - All

Integrated Toolcarrier - All

Asphalt Paver - All

Telehandlers - All

Agricultural Tractor - All

Backhoe Loaders - All

 
 

Component Code: 1401

SUBJECT: Updated Predelivery/Revisit Checklists Are Now Used

The Predelivery/Revisit Checklists have been updated. The portion of the Predelivery/Revisit Checklists that has been modified is the Battery Check line. The Battery Check line is located in the Engine row (under the Check Service Points and Fluid Levels column).

A space has been added to the Battery Check line in order to record the Open Circuit Voltage (OCV). To ensure a properly charged battery, the Open Circuit Voltage must be greater than 12.45 VDC after removing the surface voltage. If the OCV is less than 12.45 VDC, perform a battery test. Refer to Special Instruction, SEHS7633, "Battery Test Procedure" and SEHS9326, "Battery Test Sheet".

 

 

 

 

 

Updated Predelivery/Revisit Checklists

Checklist Number

Checklist Name

Machines

01-087716

Predelivery/Revisit Checklist

Compactors

01-087717

Predelivery/Revisit Checklist

Track-Type Tractors, Track-Type Loaders, Pipelayers

01-087719

Predelivery/Revisit Checklist

Scrapers

01-087720

Predelivery/Revisit Checklist

Motor Graders

01-087721

Predelivery/Revisit Checklist

Excavators, Loggers, Front Shovels, Forestry Swings

01-088680

Predelivery/Revisit Checklist

Wheel Loaders, Wheel Dozers, Skidders, Integrated Tool Carriers

01-088724

Predelivery/Revisit Checklist

Profilers, Trimmers

01-089423

Predelivery/Revisit Checklist

Asphault Pavers

01-040276

Predelivery/Revisit Checklist

Telehandlers

01-089067

Predelivery/Revisit Checklist

Belted Ag Tractors

01-089089

Predelivery/Revisit Checklist

Backhoe Loaders

01-087891

Comprobaciones antes y despues de la entraga

Excavadoras, Taladores Forestales?

01-087892

Comprobaciones antes y despues de la entraga

Montoniveladoras

01-087896

Comprobaciones antes y despues de la entraga

Cargadores de Ruedas, Tractores de Ruedas?

01-089390

Conpactadores Informe Del Servicio de le entrega

 

COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED

Caterpillar Information System:

PREMATURE INLET AND/OR EXHAUST VALVE FAILURE PREMATURE INLET AND/OR EXHAUST VALVE FAILURE
WIRING DIAGRAM FOR INSTALLING THE MARINE POWER DISPLAY WIRING DIAGRAM FOR INSTALLING THE MARINE POWER DISPLAY
Cracks have been found in the radome of the 167-8930 GPS Antenna and the 194-8015 GPS Antenna Cracks have been found in the radome of the 167-8930 GPS Antenna and the 194-8015 GPS Antenna
TIMING CALIBRATION HARNESS TIMING CALIBRATION HARNESS
3406E Marine Software May Need to be Reinstalled 3406E Marine Software May Need to be Reinstalled
Some Of The Tees In Some Breather Groups May Be Damaged By Normal Operation Some Of The Tees In Some Breather Groups May Be Damaged By Normal Operation
INACCURATE INDICATION OF TRANSMISSION OIL PRESSURE INACCURATE INDICATION OF TRANSMISSION OIL PRESSURE
Oil Leaks From Oil Pan And/Or Crankshaft Rear Seal Carrier Oil Leaks From Oil Pan And/Or Crankshaft Rear Seal Carrier
ETHER START AID OPERATION ETHER START AID OPERATION
Product Link Modules Are Not Reporting Events or Fuel Consumption Product Link Modules Are Not Reporting Events or Fuel Consumption
ELECTRONIC ENGINE CONTROL SOFTWARE ELECTRONIC ENGINE CONTROL SOFTWARE
EXHAUST MANIFOLD GASKET EXHAUST MANIFOLD GASKET
REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM REPLACEMENT OF THE FUEL RATIO CONTROL DIAPHRAGM
Exhaust Backpressure Limits For Marine Engines Exhaust Backpressure Limits For Marine Engines
Bypass Schedule May Be Affected when Machine Security System (MSS) Automatically Adjusts to North American Daylight Savings Time Bypass Schedule May Be Affected when Machine Security System (MSS) Automatically Adjusts to North American Daylight Savings Time
Some configuration settings in the Machine Security System (MSS) may change when MSS software release 207-6258 is upgraded to MSS software release 220-6355 Some configuration settings in the Machine Security System (MSS) may change when MSS software release 207-6258 is upgraded to MSS software release 220-6355
THE DIAGNOSTIC CODE 175-4 �ENGINE OIL TEMPERATURE SHORT TO GROUND� MAY BE A RESULT OF OVERCOOLING THE DIAGNOSTIC CODE 175-4 �ENGINE OIL TEMPERATURE SHORT TO GROUND� MAY BE A RESULT OF OVERCOOLING
FUEL TEMPERATURE COMPENSATION FOR C-15 OPERATING IN NEW HOLLAND FX58 FORAGE HARVESTERS FUEL TEMPERATURE COMPENSATION FOR C-15 OPERATING IN NEW HOLLAND FX58 FORAGE HARVESTERS
Installation Of The Sitevision GPS Cable Encoder Bracket On Hydraulic Excavators Installation Of The Sitevision GPS Cable Encoder Bracket On Hydraulic Excavators
Resetting The G3600 MIDS Control Panel Display Resetting The G3600 MIDS Control Panel Display
Fleet/Key Configuration Issue Using Cat ET Version 2002B Fleet/Key Configuration Issue Using Cat ET Version 2002B
After Software Is Flashed to the Marine Power Display (MPD), the MPD May Lose Graphical Display After Software Is Flashed to the Marine Power Display (MPD), the MPD May Lose Graphical Display
BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS BOLT BREAKAGE AT EXHAUST MANIFOLD SLIP JOINTS
Notice to Users of CCMpc V1.4 for G3500 and G3600 Applications Notice to Users of CCMpc V1.4 for G3500 and G3600 Applications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.