TIMING CALIBRATION HARNESS
Usage:
CONFIDENTIAL TIBU3675
Show/hide table
|
TECHNICAL INFORMATION BULLETIN |
AUGUST 14, 2002 |
|
ENGINES |
C9 (CLJ), 3126B (BEJ) |
|
Component Codes: 1900, 1905 |
SUBJECT: TIMING CALIBRATION HARNESS
PROBLEM:
Current electrical schematics picture a timing calibration probe (J400/P400) to be part of the main wiring harness however, the timing calibration probe and wiring have been removed from the main wiring harness in production on above engine models.
SOLUTION:
When engine speed/timing sensor calibration is required, use a 170-3519 timing calibration harness assembly which is available from parts department. Refer to special instructions REHS0399-01
COPYRIGHT 2002 CATERPILLAR
ALL RIGHTS RESERVED