Remanufactured Cylinder Packs Available{1239}
Usage:
G3304 (37Y),
G3306 (07Y) Engines
Remanufactured cylinder packs are available for the above engines. The 0R-3662 Remanufactured Cylinder Pack is available for low compression ratio (8:1) engines and the 0R-3661 Remanufactured Cylinder Pack is available for high compression ratio (10.5:1) engines. The original pistons in these engines had two rings. Three ring pistons are used in the remanufactured cylinder packs. The three ring pistons offer reduced oil consumption compared to the original two ring pistons.
Caterpillar Information System:
1993/11/29 Training Available Via Videotapes For Service And Marketing Systems{0314}
1993/11/22 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/15 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/09 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/09 New Dynamic Fuel Ratio Control (FRC) Settings Provide Improved Engine Response{1278}
1993/11/09 Improved Window Seals And Sealing Procedure Used On Most Caterpillar Machines{7300,7310}
1993/11/01 New Inlet Valve Lash Setting{1105}
1993/11/01 Low Power Complaints Caused By 9X7793 Rack Sensor Non-Linearity On Electronic Engines{1911}
1993/11/01 On Highway Dynamic Engine Response Test{1000}
1993/10/25 Camshaft Drive Gear Inspection{1212}
1993/10/25 Air Filter Indicator Maintenance{7452}
1993/10/18 Longer Bolts Required With New Spacer Block {1124}
1993/11/29 Oil Recommendations For The 3500 Family Of Engines{1300}
1993/11/29 Alarm/Shutdown System For Cogeneration Or Landfill Applications{7400}
1993/11/29 0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/12/13 New High Temperature Resistant Seal Group Available For Jacket Water Pump{1361}
1993/12/20 Replacement Of Earlier Truck Engines In General Motors Topkick And Kodiak Trucks {1000}
1993/12/20 Procedure To Prevent Moisture From Collecting In The Hose Between The Air Inlet Manifold And Transducer Module (Boost Sensor) {1917}
1993/12/20 Exhaust Brakes Can Not Be Installed On All Remanufactured 3208 Engine Arrangements {1119}
1993/12/20 Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20 New Inlet/Exhaust Valve Has A Chrome Stem {1105}
1993/12/27 Cleaning SR4 Generators {1404,4450}
1993/12/27 Double Shielded Bearings Released {4471}
1994/01/10 Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}