1993/11/01 Caterpillar


New Inlet Valve Lash Setting{1105}

Usage:


3606 (8RB),
3608 (6MC),
3612 (9RC),
3616 (1PD) Engines

Previously, the intake valve lash was set at 0.5 mm (.020 in). To provide increased intake valve life, the intake valve setting has been changed. On a cold engine (one that has not been running for a few hours), adjust the intake valve lash to 0.6 mm (.024 in). The exhaust valve lash remains at 1.0 mm (.039 in).

NOTE: This change does NOT pertain to G3600 Engines.

Caterpillar Information System:

1993/11/01 Low Power Complaints Caused By 9X7793 Rack Sensor Non-Linearity On Electronic Engines{1911}
1993/11/01 On Highway Dynamic Engine Response Test{1000}
1993/10/25 Camshaft Drive Gear Inspection{1212}
1993/10/25 Air Filter Indicator Maintenance{7452}
1993/10/18 Longer Bolts Required With New Spacer Block {1124}
1993/10/18 New Cylinder Head, Spacer Block, And Head Gasket Available {1101,1124,1221}
1993/10/18 24V Fog Lamp Now Available {1400}
1993/10/11 New Connecting Rod Identification Used On Engines {1218}
1993/10/11 New O-ring Seal Used On Cylinder Block Covers {1200}
1993/10/11 New 9U7360 Piston Ring Groove Gauge Group Available {0763,1214,1215}
1993/10/11 Cleaning Kit Available For High Performance Marine Engine Air Filters {1054}
1993/10/11 Fuel Consumption Versus Ambient Temperature {0374,0375,1000}
1993/11/09 Improved Window Seals And Sealing Procedure Used On Most Caterpillar Machines{7300,7310}
1993/11/09 New Dynamic Fuel Ratio Control (FRC) Settings Provide Improved Engine Response{1278}
1993/11/09 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
1993/11/15 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/22 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/29 Training Available Via Videotapes For Service And Marketing Systems{0314}
1993/11/29 Remanufactured Cylinder Packs Available{1239}
1993/11/29 Oil Recommendations For The 3500 Family Of Engines{1300}
1993/11/29 Alarm/Shutdown System For Cogeneration Or Landfill Applications{7400}
1993/11/29 0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/12/13 New High Temperature Resistant Seal Group Available For Jacket Water Pump{1361}
1993/12/20 Replacement Of Earlier Truck Engines In General Motors Topkick And Kodiak Trucks {1000}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.