1993/10/11 Caterpillar


New O-ring Seal Used On Cylinder Block Covers {1200}

Usage:


3500 Family Of Engines

Description of Change: A new O-ring seal is used on the two cylinder block covers. The new seal is made of a different material. The former seal could become hard and brittle, and leak oil.


Location of the new 5P-8210 Seals.

Adaptable To: The new 5P-8210 Seal is a direct replacement for the former 6F-6673 Seal. The new seal is brown. The former seal is black. The new seal is adaptable to earlier production.

NOTE: The new seal may not be contained in all gasket kits. Be sure to check the kit contents.

Caterpillar Information System:

1993/10/11 New 9U7360 Piston Ring Groove Gauge Group Available {0763,1214,1215}
1993/10/11 Cleaning Kit Available For High Performance Marine Engine Air Filters {1054}
1993/10/11 Fuel Consumption Versus Ambient Temperature {0374,0375,1000}
1993/10/11 Parts Manual Maintenance Parts Page Improved {0374}
1993/10/11 New Freon Compressor Mounting Bracket Used {1154,1802}
1993/10/04 New Product Support Update - 3500 Family Of Engines - Special Edition Service Magazine, SEPD0168 {0374}
1993/10/04 New Main Bearings Have Higher Fatigue Strength {1203,1200}
1993/10/04 New Oil Drain Valve Assembly Prevents Oil Leaks {1302}
1993/10/04 New Crankshaft Seal Groups Prevent Oil Lip Damage {1160,1161}
1993/10/04 New Cylinder Liner And Seal Eliminates Use Of Sealant {1216}
1993/09/27 Half Grommets Used In Clamp Assemblies Are Now Serviceable{1307}
1993/09/27 New Camshaft Design{1210}
1993/10/11 New Connecting Rod Identification Used On Engines {1218}
1993/10/18 24V Fog Lamp Now Available {1400}
1993/10/18 New Cylinder Head, Spacer Block, And Head Gasket Available {1101,1124,1221}
1993/10/18 Longer Bolts Required With New Spacer Block {1124}
1993/10/25 Air Filter Indicator Maintenance{7452}
1993/10/25 Camshaft Drive Gear Inspection{1212}
1993/11/01 On Highway Dynamic Engine Response Test{1000}
1993/11/01 Low Power Complaints Caused By 9X7793 Rack Sensor Non-Linearity On Electronic Engines{1911}
1993/11/01 New Inlet Valve Lash Setting{1105}
1993/11/09 Improved Window Seals And Sealing Procedure Used On Most Caterpillar Machines{7300,7310}
1993/11/09 New Dynamic Fuel Ratio Control (FRC) Settings Provide Improved Engine Response{1278}
1993/11/09 New Cylinder Block Groups Have Additional Material Added To The Camshaft Bore Area{1201}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.