1993/12/20 Caterpillar


New Inlet/Exhaust Valve Has A Chrome Stem {1105}

Usage:


G3508 (2FJ),
G3512 (4KC),
G3516 (3RC) Engines

Description of Change: A new inlet/exhaust valve with a chrome stem is used. The new valve increases valve train efficiency and reduces the occurrence of valve sticking.

Adaptable To: The new 104-7184 Inlet/Exhaust Valve is a direct replacement for the former 4P-2852 Inlet/Exhaust Valve. The new inlet/exhaust valve is in effect as shown in Chart A. The new inlet/exhaust valve can be installed in the engines identified in Chart B. The new inlet/exhaust valve has a face angle of 191/4degrees. The former inlet/exhaust valve has a face angle of 193/4degrees. Although the face angle has changed, the two valves are completely interchangeable upon retrofit.

Caterpillar Information System:

1993/12/20 Carburetor Control Linkage (EG3P Governor) {1265}
1993/12/20 Exhaust Brakes Can Not Be Installed On All Remanufactured 3208 Engine Arrangements {1119}
1993/12/20 Procedure To Prevent Moisture From Collecting In The Hose Between The Air Inlet Manifold And Transducer Module (Boost Sensor) {1917}
1993/12/20 Replacement Of Earlier Truck Engines In General Motors Topkick And Kodiak Trucks {1000}
1993/12/13 New High Temperature Resistant Seal Group Available For Jacket Water Pump{1361}
1993/11/29 0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29 Alarm/Shutdown System For Cogeneration Or Landfill Applications{7400}
1993/11/29 Oil Recommendations For The 3500 Family Of Engines{1300}
1993/11/29 Remanufactured Cylinder Packs Available{1239}
1993/11/29 Training Available Via Videotapes For Service And Marketing Systems{0314}
1993/11/22 8T-8697 Electronic Control Analyzer Programmer (ECAP) Improved{1900}
1993/11/15 New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/12/27 Cleaning SR4 Generators {1404,4450}
1993/12/27 Double Shielded Bearings Released {4471}
1994/01/10 Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10 The 1W-1420 Oil Cooler Bracket For Marine Gears Has Been Modifie{3320}
1994/01/10 New Diaphragm Used In Governor Air Actuator Group Improves Service Life{1265}
1994/01/17 9X6779 Radio Has No Memory {7338}
1994/01/17 New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17 New Valve Cover Gasket Used {1107}
1994/01/17 Low Coolant Level Plate In Radiator May Cause False Coolant Level Readings {1353}
1994/01/31 Automatic Shut-Off Systems Not Recommended on Mobile Earthmoving Equipment {7418,7403}
1994/02/07 New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/02/07 12 And 24 Volt DC Work Lights Are Available{0600}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.