422F, 428F, 432F, 434F and 444F Backhoe Loaders Caterpillar


Window Washer Reservoir - Fill

Usage:

444F FBN


PERHATIAN

Sewaktu bekerja dalam temperatur yang membeku, gunakan larutan pembersih kaca jendela Caterpillar atau larutan pembersih anti-beku komersial lainnya yang tersedia.





Ilustrasi 1g02665636

Botol cairan washer terletak di ruang engine.

  1. Buka pintu akses engine.

  1. Lepaskan tutup pengisian.

  1. Isi botol cairan washer dengan cairan washer melalui lubang pengisi.

  1. Ganti tutup pengisian.

  1. Tutup pintu akses engine.

Caterpillar Information System:

2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
R1300G Load Haul Dump Cooling System Coolant Extender (ELC) - Add
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
R1300G Load Haul Dump Cooling System Coolant (DEAC) - Change
R1300G Load Haul Dump Cooling System Level - Check
SH-56B Felling Head Felling Head Grapple Arm Spring - Disassemble
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 2) - Obtain
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0247 - FMI 09
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Level - Check
422F, 428F, 432F, 434F and 444F Backhoe Loaders Wheel Nut Torque - Check
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Diagnostic Capabilities
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0248 - FMI 09
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 03
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 05
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 06
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310} Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
SH-56B Felling Head Felling Head Grapple Arm Spring - Assemble
773G and 775G Off-Highway Truck Hydraulic and Braking System Truck Body Mounting
CB-634D Paving Compactor Propel System Propel Control - Calibrate
CB-634D Paving Compactor Propel System Solenoid Valve (Forward Propel) - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.