Grapple Arm Spring - Disassemble
Disassemble Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | QTY     |
A     | 385-5040     | Tube As.     | 1     |
Start By:
- Remove accumulator spring arm.
- Place accumulator arm spring (1) into Tooling (A) . Remove bolts (2) and retainer (3) .
Show/hide table
Illustration 1 | g02666656 |
- Use Tooling (A) in order to release the spring pressure.
Show/hide table
Illustration 2 | g02666658 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove spring (4) from tube assembly (5) .
Show/hide table
Illustration 3 | g02666677 |
Caterpillar Information System:
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 2) - Obtain
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 1) - Obtain
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0247 - FMI 09
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Level - Check
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant (ELC) - Change
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Parking Brake - Remove and Install
428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Service Tools
SH-56B Felling Head Felling Head Accumulator Arm - Assemble
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Fresh Air) - Clean/Inspect/Replace
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Change Language
SH-56B Felling Head Felling Head Accumulator Arm - Disassemble
R1300G Load Haul Dump Cooling System Level - Check
R1300G Load Haul Dump Cooling System Coolant (DEAC) - Change
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves
R1300G Load Haul Dump Cooling System Coolant Extender (ELC) - Add
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
422F, 428F, 432F, 434F and 444F Backhoe Loaders Window Washer Reservoir - Fill
422F, 428F, 432F, 434F and 444F Backhoe Loaders Wheel Nut Torque - Check
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Diagnostic Capabilities
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0248 - FMI 09
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 03