Accumulator Arm - Disassemble
Disassemble Procedure
Start By:
- Remove accumulator arm.
- Remove lip seal (1) .
Show/hide table
Illustration 1 | g02664696 |
- Remove bearing cone (2) .
Show/hide table
Illustration 2 | g02664698 |
- Remove bearing cup (3) .
Show/hide table
Illustration 3 | g02664699 |
- Repeat Steps 1 through 2 for the other side of accumulator arm.
- Remove lip seal (5) from upper arm assembly (4) .
Show/hide table
Illustration 4 | g02664762 |
- Remove bearing cone (6) .
Show/hide table
Illustration 5 | g02664763 |
- Remove bearing cup (7) .
Show/hide table
Illustration 6 | g02664764 |
- Repeat Steps 5 through 8 for other side of upper arm assembly (4) .
- Repeat Steps 5 through 8 for lower arm assembly.
Caterpillar Information System:
2014/07/21 Optional Mirror Extensions for Heated and Non-Heated Mirrors are now Available on Certain M Series and M Series 2 Motor Graders {7319}
SH-56B Felling Head Felling Head Grapple Arm Spring - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Stopping the Engine if an Electrical Malfunction Occurs
2011/08/22 A New Foot Support is Available for Certain M and M Series 2 Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Sideshift Control
428F, 432F, 434F and 444F Backhoe Loaders Stabilizer Control
2011/09/06 A New Rear Window Shade is Available for Certain M Series Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Monitoring System
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Flashing New Software or Upgrading the IQAN Machine System
428F, 432F, 434F and 444F Backhoe Loaders Operator Controls
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System System Schematic
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Front Suspension Cylinder - Remove and Install
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Change Language
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Fresh Air) - Clean/Inspect/Replace
SH-56B Felling Head Felling Head Accumulator Arm - Assemble
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Service Tools
428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Parking Brake - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant (ELC) - Change
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Level - Check
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0247 - FMI 09
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 1) - Obtain
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 2) - Obtain
SH-56B Felling Head Felling Head Grapple Arm Spring - Disassemble