Sideshift Frame
 | |
| Illustration 1 | g02664542 |
Move lever (1) in order to control the stabilizer on the left side of the machine.
Move lever (2) in order to control the stabilizer on the right side of the machine.
Note: If equipped, remove the chain that is used for transporting from the base of each stabilizer leg.
| STABILIZER DOWN (3) - Move the lever to this position in order to lower the stabilizer. Moving the lever will raise the rear of the machine. |
HOLD (4) - Release the lever from the STABILIZER DOWN position or from the STABILIZER UP position in order to stop the stabilizer movement.
| STABILIZER UP (5) - Move the lever to this position in order to raise the stabilizer. Moving the lever will lower the machine. |
Auto Up Mode (6) (If Equipped) - Move the lever to this position in order to automatically raise the stabilizer. The lever will remain in this position for 10 seconds.
Note: Be careful when you raise the stabilizers. The stabilizers can be the only restraint that is preventing the machine from falling into the area that is being excavated. When you operate on a slope, engage the parking brake before you raise the stabilizers.
Before you operate the backhoe, use the stabilizers in order to lift the machine and use the stabilizers in order to level the machine.
Note: The action alarm (if equipped) will sound when you raise one or both stabilizers in order to lower the machine to the ground and the transmission direction control lever is in the FORWARD position or in the REVERSE position.