Accumulator Arm - Assemble
Assembly Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | QTY |
| A | 1P-0510 | Driver Gp | 1 |
- Install bearing cup (7)
Show/hide table
 | |
| Illustration 1 | g02664764 |
- Install bearing cone (6) .
Show/hide table
 | |
| Illustration 2 | g02664763 |
- Use Tooling (A) in order to install lip seal (5) .
Show/hide table
 | |
| Illustration 3 | g02664866 |
- Repeat Steps 1 thorough 3 for other side of upper arm assembly (4) .
- Repeat Steps 1 through 3 for lower arm assembly.
- Install bearing cup (3) .
Show/hide table
 | |
| Illustration 4 | g02664699 |
- Install bearing cone (2) .
Show/hide table
 | |
| Illustration 5 | g02664698 |
- Use Tooling (A) in order to install lip seal (1) .
Show/hide table
 | |
| Illustration 6 | g02664876 |
End By: Install accumulator arm.
Caterpillar Information System:
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Fresh Air) - Clean/Inspect/Replace
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Change Language
SH-56B Felling Head Felling Head Accumulator Arm - Disassemble
2014/07/21 Optional Mirror Extensions for Heated and Non-Heated Mirrors are now Available on Certain M Series and M Series 2 Motor Graders {7319}
SH-56B Felling Head Felling Head Grapple Arm Spring - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Stopping the Engine if an Electrical Malfunction Occurs
2011/08/22 A New Foot Support is Available for Certain M and M Series 2 Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Sideshift Control
428F, 432F, 434F and 444F Backhoe Loaders Stabilizer Control
2011/09/06 A New Rear Window Shade is Available for Certain M Series Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Monitoring System
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Flashing New Software or Upgrading the IQAN Machine System
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Service Tools
428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Parking Brake - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant (ELC) - Change
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Level - Check
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0247 - FMI 09
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 1) - Obtain
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 2) - Obtain
SH-56B Felling Head Felling Head Grapple Arm Spring - Disassemble
R1300G Load Haul Dump Cooling System Level - Check
R1300G Load Haul Dump Cooling System Coolant (DEAC) - Change
C13, C15, and C18 Tier 4 Final Engines Cylinder Head Valves