Grapple Arm Spring - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | QTY     |
A     | 138-7575     | Link Bracket     | 1     |
B     | 1U-9200     | Lever Puller Hoist Gp     | 1     |
- Install Tooling (A) and Tooling (B) .
Show/hide table
Illustration 1 | g02665180 |
- Install Tooling (B). Tighten Tooling (B) in order to compress spring to install retainer (2) Install bolt (1) to hold retainer (2) .
Show/hide table
Illustration 2 | g02665181 |
Show/hide table
Illustration 3 | g02665183 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Remove bolt (3) and pin assembly (4) .
Show/hide table
Illustration 4 | g02665184 |
- Remove bolt (5) and pin assembly (6) .
Show/hide table
Illustration 5 | g02665219 |
- Remove grapple arm spring (7) .
Show/hide table
Illustration 6 | g02665221 |
- Remove bushing (8) .
Show/hide table
Illustration 7 | g02665226 |
Installation Procedure
- Install accumulator arm spring (7) in the reverse order of removal.
Caterpillar Information System:
422F, 428F, 432F, 434F and 444F Backhoe Loaders Stopping the Engine if an Electrical Malfunction Occurs
2011/08/22 A New Foot Support is Available for Certain M and M Series 2 Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Sideshift Control
428F, 432F, 434F and 444F Backhoe Loaders Stabilizer Control
2011/09/06 A New Rear Window Shade is Available for Certain M Series Motor Graders {7301}
428F, 432F, 434F and 444F Backhoe Loaders Monitoring System
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Flashing New Software or Upgrading the IQAN Machine System
428F, 432F, 434F and 444F Backhoe Loaders Operator Controls
299D and 299D XHP Compact Track Loaders and 272D and 272D XHP Skid Steer Loaders Machine Electronic Control System System Schematic
735B, 740B and 740B EJECTOR Articulated Trucks Machine Systems Front Suspension Cylinder - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Mirror
422F, 428F, 432F, 434F and 444F Backhoe Loaders Alternate Exit
2014/07/21 Optional Mirror Extensions for Heated and Non-Heated Mirrors are now Available on Certain M Series and M Series 2 Motor Graders {7319}
SH-56B Felling Head Felling Head Accumulator Arm - Disassemble
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Change Language
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Fresh Air) - Clean/Inspect/Replace
SH-56B Felling Head Felling Head Accumulator Arm - Assemble
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Service Tools
428F, 432F, 434F and 444F Backhoe Loaders Cab Filter (Recirculation) - Clean/Inspect/Replace
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Parking Brake - Remove and Install
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant (ELC) - Change
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Level - Check
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0247 - FMI 09
422F, 428F, 432F, 434F and 444F Backhoe Loaders Cooling System Coolant Sample (Level 1) - Obtain