Grapple Arm Spring - Assemble
Assembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | QTY     |
A     | 385-5040     | Tube As.     | 1     |
- Install spring (4) into tube assembly (5) .
Show/hide table
Illustration 1 | g02666677 |
- Use Tooling (A) in order to compress spring (4) .
Show/hide table
Illustration 2 | g02666658 |
Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury. To prevent possible injury, follow the established assembly procedure and wear protective equipment. |
- Install retainer (3) and bolts (2) , Remove accumulator arm spring (1) from Tooling (A) .
Show/hide table
Illustration 3 | g02666656 |
End By: Install accumulator arm spring.
Caterpillar Information System:
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310} Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 06
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 05
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 03
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0248 - FMI 09
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Diagnostic Capabilities
422F, 428F, 432F, 434F and 444F Backhoe Loaders Wheel Nut Torque - Check
422F, 428F, 432F, 434F and 444F Backhoe Loaders Window Washer Reservoir - Fill
2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
966H Wheel Loader and 972H Wheel Loader Electrohydraulic System Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
773G and 775G Off-Highway Truck Hydraulic and Braking System Truck Body Mounting
CB-634D Paving Compactor Propel System Propel Control - Calibrate
CB-634D Paving Compactor Propel System Solenoid Valve (Forward Propel) - Calibrate
CB-634D Paving Compactor Propel System Solenoid Valve (Reverse Propel) - Calibrate
CB-634D Paving Compactor Propel System Speed Control - Calibrate
336E Excavator Plate Locations and Film Locations
A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053} A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053}
2011/08/25 A New Alternator Debris Guard and Filter Are Available for Certain Medium Wheel Loaders {1054, 1405, 1405}
2011/08/12 Improved Transmission Software Now Used on Certain Load Haul Dump Machines {3168, 7620}
R1700G Load Haul Dump Transmission Oil Filter - Replace
R2900G Load Haul Dump Transmission Oil Filter - Replace
R1300G Load Haul Dump Cooling System Water Temperature Regulator - Replace