Truck Body Mounting
Show/hide table
 | |
| Illustration 1 | g02155794 |
Typical left-hand side view | |
Show/hide table
 | |
| Illustration 2 | g02155796 |
View A-A | |
Show/hide table
 | |
| Illustration 3 | g02156574 |
View B | |
(1) 347-5472 Pad As
(2) 106-8224 Shim
- Thickness ... 2.0 mm (0.08 inch)
(3) 8W-3941 Shoe
Show/hide table
 | |
| Illustration 4 | g02156583 |
View C-C | |
(4) Use the 124-9014 Thrust Washer (3.0 mm (0.1 inch)) and use the 7D-7488 Thrust Washer (5.0 mm (0.2 inch)) to center the body on the frame.
Lubricate Hoist Cylinder Pins
Show/hide table
 | |
| Illustration 5 | g02666996 |
(5) Lubricate the pin with 4C-5592 Anti-Seize Compound prior to assembly.
Caterpillar Information System:
SH-56B Felling Head Felling Head Grapple Arm Spring - Assemble
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310} Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 06
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 05
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0420 - FMI 03
773G and 775G Quarry Trucks Chassis Electronic Control System MID 087 - CID 0248 - FMI 09
2470C, 2570C and 2670C Wheel Feller Bunchers IQAN Monitoring ; Control System Diagnostic Capabilities
422F, 428F, 432F, 434F and 444F Backhoe Loaders Wheel Nut Torque - Check
422F, 428F, 432F, 434F and 444F Backhoe Loaders Window Washer Reservoir - Fill
2013/08/21 Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
C13, C15, and C18 Tier 4 Final Engines Cylinder Head
CB-634D Paving Compactor Propel System Propel Control - Calibrate
CB-634D Paving Compactor Propel System Solenoid Valve (Forward Propel) - Calibrate
CB-634D Paving Compactor Propel System Solenoid Valve (Reverse Propel) - Calibrate
CB-634D Paving Compactor Propel System Speed Control - Calibrate
336E Excavator Plate Locations and Film Locations
A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053} A New V-Band Clamp and New Turbochargers Are Used in Certain 789C, 793C, and 793D Off-Highway Truck Engines with Low Altitude Arrangements {1052, 1053}
2011/08/25 A New Alternator Debris Guard and Filter Are Available for Certain Medium Wheel Loaders {1054, 1405, 1405}
2011/08/12 Improved Transmission Software Now Used on Certain Load Haul Dump Machines {3168, 7620}
R1700G Load Haul Dump Transmission Oil Filter - Replace
R2900G Load Haul Dump Transmission Oil Filter - Replace
R1300G Load Haul Dump Cooling System Water Temperature Regulator - Replace
R1300G Load Haul Dump Cooling System Pressure Cap - Clean/Replace