C175-16 Locomotive Engine Caterpillar


Valve Mechanism

Usage:

C175-16 3A9


注意

安装推杆时,必须小心操作,确保推杆的端部正确座合在挺杆罩内。 起动发动机前,使用手电筒检查推杆端部在挺杆罩内的安装情况。 如果部件没有正确组装,气门系部件将出现损坏。




图 1g02884476

表 1
技术规格 - 325-2666 气门机构总成 
项目  数量  零件  技术规格说明 
247-3422 螺母  拧紧至扭矩为 120 ± 15 N·m (89 ± 11 lb ft)。 
325-2670 螺栓  拧紧至扭矩为 200 ± 30 N·m (148 ± 22 lb ft)。 
325-2663 摇臂轴组件  直径为 50.000 ± 0.013 mm (1.9685 ± 0.0005 inch)。 
448-3228 气门桥  装配期间,确保桥中的槽定位在内侧,朝向摇臂轴组件。 
254-5922 衬套  安装后,摇臂轴组件衬套中的孔径为 50.086 ± 0.015 mm (1.9719 ± 0.0006 inch)。 
进气门的气门间隙调整值为 0.80 ± 0.08 mm (0.031 ± 0.003 inch)。 
排气门的气门间隙调整值为 1.3 ± 0.08 mm (0.051 ± 0.003 inch)。 

Caterpillar Information System:

C27 and C32 Engines for Caterpillar Built Machines Cylinder Block
2011/07/28 Correction to Disassembly and Assembly , "Final Drive and Brake - Install" for R2900G Load Haul Dump Machines {4050, 4251}
2470C, 2570C and 2670C Wheel Feller Bunchers Machine Systems Steering Cylinder - Remove and Install
2011/06/08 New Software Containing Engine Idle Shutdown Feature (EIS) Is Now Used on Certain Off-Highway Trucks {1920, 7620}
AP1000E and BG1000E Asphalt Pavers Machine Systems Relief Valve (Screed Counterbalance) - Test and Adjust
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Rear Drive Shaft - Remove and Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Pressure Reducing Valve - Test and Adjust - Shift Solenoid
AP1000E and BG1000E Asphalt Pavers Machine Systems Pump Control Valve (Auxiliary) - Test and Adjust
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Center Drive Shaft - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders Speed Control (PWM) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Piston Pump (Steering) - Assemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Piston Pump (Steering) - Disassemble
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Axle Shaft - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Front Axle - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Vibration Damper
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Center Axle - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders Throttle Lock - Test
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Travel System
992K Wheel Loader Object Detection Sensor - Clean/Inspect
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Control Valve (Travel)
2011/07/08 A New Pump Control Valve Group is Now Used on the Piston Pump Groups on Certain Off-Highway Trucks {5070}
2013/09/12 A New Aftercooler Core Assembly is Now Used in the Air Aftercooler Group on the 773F and 775F Off-Highway Trucks {1063, 1353, 1806}
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
C27 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.