Steering Cylinder - Remove and Install
Removal Procedure
- Connect the steering frame lock.
- Remove bolts (1) and covers (2) .
Show/hide table
Illustration 1 | g02581716 |
- Remove hose assemblies (3) and (4). Remove retaining ring (6) and bolt (7). Remove pin (5) .
Show/hide table
Illustration 2 | g02581736 |
- Remove retaining ring (9) and bolt (10). Remove pin (8) and shim (11). Use two people in order to remove steering cylinder (12). The weight of steering cylinder (12) is approximately 29 kg (65 lb).
Show/hide table
Illustration 3 | g02581856 |
Installation Procedure
- Install steering cylinder (12) in the reverse order of removal.
Caterpillar Information System:
2011/06/08 New Software Containing Engine Idle Shutdown Feature (EIS) Is Now Used on Certain Off-Highway Trucks {1920, 7620}
AP1000E and BG1000E Asphalt Pavers Machine Systems Relief Valve (Screed Counterbalance) - Test and Adjust
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Rear Drive Shaft - Remove and Install
AP1000E and BG1000E Asphalt Pavers Machine Systems Pressure Reducing Valve - Test and Adjust - Shift Solenoid
AP1000E and BG1000E Asphalt Pavers Machine Systems Pump Control Valve (Auxiliary) - Test and Adjust
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Center Drive Shaft - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders Speed Control (PWM) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Piston Pump (Steering) - Assemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Machine Systems Piston Pump (Steering) - Disassemble
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Motor Case Drain Flow (Auger Conveyor and Drag Conveyor) - Test
AP1000E and BG1000E Asphalt Pavers Machine Systems Piston Pump Neutral (Auger Conveyor and Drag Conveyor) - Test and Adjust
2011/06/06 Improved Seal and Retainer Ring is Available for Certain Articulated Trucks {4008}
2011/07/28 Correction to Disassembly and Assembly , "Final Drive and Brake - Install" for R2900G Load Haul Dump Machines {4050, 4251}
C27 and C32 Engines for Caterpillar Built Machines Cylinder Block
C175-16 Locomotive Engine Valve Mechanism
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Axle Shaft - Remove and Install
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Front Axle - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Vibration Damper
735B, 740B and 740B EJECTOR Articulated Trucks Power Train Center Axle - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders Throttle Lock - Test
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Travel System
992K Wheel Loader Object Detection Sensor - Clean/Inspect
541 Series 2 Track Feller Buncher and 552 Series 2 Track Feller Buncher Machine Systems Control Valve (Travel)
2011/07/08 A New Pump Control Valve Group is Now Used on the Piston Pump Groups on Certain Off-Highway Trucks {5070}