Swing Frame - Install
- Install swing frame (4) into position. The weight of swing frame (9) is
368 kg (811 lb) . - Install the top pin (5).
- Install bolt (3) that holds top pin (5).
Show/hide table
Illustration 3 g01088482 - Install bottom pin (6). Install nut (7) on bottom pin.
Show/hide table
Illustration 4 g01088477 - Install cylinder pin (2).
- Repeat Step 5 for the other side.
Show/hide table
Illustration 5 g00781851 - Install the nuts and rods (1) that hold the swing cylinder pins.
Show/hide table
Illustration 1 | g01088467 |
Show/hide table
Illustration 2 | g01088475 |
End By:
- Install the boom. Refer to Disassembly and Assembly, "Boom - Remove and Install".
Caterpillar Information System:
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Remove
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
PS-150C Pneumatic Compactor Machine System Gear Pump (Steering)
2004/07/19 Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
PS-150C Pneumatic Compactor Machine System Steering Hydraulic System
2004/12/27 Two New Track Presses Are Now Available {0700, 0729}
988H Wheel Loader Braking System Brake Accumulator - Test and Charge
Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400} Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Main Control Valve
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E092 Boost Pressure Above Normal
CB-334E Series II and CB-335E Series II Paving Compactors Tire Inflation - Check
AP-800D and BG-230D Asphalt Pavers Machine Systems Generator Frequency - Test and Adjust
C15 and C18 Engines for Caterpillar Built Machines Fuel System Pressure - Test