Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
- Off-Highway Truck/Tractor:
- 776C (S/N: 2TK1-UP)
- 777C (S/N: 4XJ1-UP)
A portion of the existing information in the section , "Operational Checks" is incorrect. Replace Step 6 and Step 7 in the "Check 2: Service Brake Check" section and in the "Check 4: Secondary Brake Check" section with the following information. The remainder of the information is correct.
- Move the transmission lever to first gear.
- Increase engine speed to 1200 rpm. The machine should not move.
Caterpillar Information System:
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
797B Off-Highway Truck Daily Inspection
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
PS-150C Pneumatic Compactor Machine System Gear Pump (Steering)
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
446D Backhoe Loader Machine Systems Swing Frame - Remove
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
PS-150C Pneumatic Compactor Machine System Steering Hydraulic System
2004/12/27 Two New Track Presses Are Now Available {0700, 0729}