Exhaust Temperature - Test
Show/hide table
所需工具     | ||
零件号     | 零件名称     | 数量     |
349-4200     | 温度计     | 1     |
当发动机在低怠速运转时,排气歧管排气口温度可表明单体喷油器的状况:
温度低表明没有燃油喷入该气缸内。 单体喷油器不工作或燃油系统有故障都可能造成这种低温现象。
温度偏高可能表明太多的燃油流入该气缸。 单体喷油器故障可能造成这种高温现象。
使用 349-4200 温度计 检查排气温度。 关于完整的操作和保养说明,请参阅此工具的操作手册。
Caterpillar Information System:
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
797B Off-Highway Truck Daily Inspection
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
R2900G Load Haul Dump Machine Systems Front Frame from Rear Frame - Separate
238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320} 238-4569 Duct Gp-Air Custom Product Support Literature for Certain Load Haul Dump Machines{7320}
2004/08/02 Correction to Special Instruction, REHS2143, "Product Link PL-102C System Installation" {7602}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Gear Motor (Fan Drive) - Install
446D Backhoe Loader Machine Systems Stabilizer Cylinder - Remove and Install
446D Backhoe Loader Machine Systems Floorplate - Remove and Install
PS-150C Pneumatic Compactor Propel System Relief Valve (Flushing Valve) - Test and Adjust - Machines with Optional Flow Divider
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
2004/07/19 Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
PS-150C Pneumatic Compactor Machine System Gear Pump (Steering)
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
446D Backhoe Loader Machine Systems Swing Frame - Remove
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove