Swing Frame - Remove
Start By:
- Remove the boom. See Disassembly and Assembly, "Boom - Remove and Install".
- Remove the nuts and rods (1) that hold the swing cylinder pins.
Show/hide table
Illustration 2 g01088477 - Remove cylinder pin (2).
- Repeat Step 2 for the other side.
Show/hide table
Illustration 3 g01088467 Show/hide table
Illustration 4 g01088475 - Install a suitable lifting device on swing frame (4) in order to support swing frame (4). The lifting device will allow the removal of top pin (5).
- Remove bolt (3) that holds top pin (5).
- Remove top pin (5).
Show/hide table
Illustration 5 g01088482 - Remove nut (7) from bottom pin (6). Remove pin (6).
- Remove swing frame (4). The weight of swing frame (4) is approximately
368 kg (811 lb) .
Show/hide table
| |
| Illustration 1 | g00781851 |
Caterpillar Information System:
TK370, TK371, TK380 and TK381 Wheel Feller Bunchers Machine Systems Felling Head System - Industrial Tractor
PS-150C Pneumatic Compactor Machine System Metering Pump (Steering)
PS-150C Pneumatic Compactor Machine System Gear Pump (Steering)
2004/07/19 Correction to Testing and Adjusting , "Operational Checks" {4251, 4278}
CB-434D and CB-434D Series XW Vibratory Compactors Engine Supplement Engine - Remove
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Steering Column - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Exhaust Temperature - Test
2004/12/27 Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
C15 and C18 Engines for Caterpillar Built Machines Aftercooler - Test
797B Off-Highway Truck Daily Inspection
2004/07/26 A New Improved Articulation Lock Pin and a New Hitch are Now Used {7050, 7051}
988H Wheel Loader Power Train Position Sensor (Left Brake Pedal) (Operator Monitor) - Calibrate
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
446D Backhoe Loader Machine Systems Swing Frame - Install
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
PS-150C Pneumatic Compactor Machine System Steering Hydraulic System
2004/12/27 Two New Track Presses Are Now Available {0700, 0729}
988H Wheel Loader Braking System Brake Accumulator - Test and Charge
Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400} Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400}
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Main Control Valve
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E092 Boost Pressure Above Normal