Tire Inflation - Check
If necessary, inflate the tires.
For normal operating conditions, inflate the tires to the proper pressure:
- The proper pressure for the CB-335E is 240 ± 21 kPa (35 ± 3 psi).
The tire inflation pressure is based on the weight of a machine that is ready to work and the machine is without attachments. The pressure is based on the rated payload, and in average operating conditions. Pressures for each application may vary. Consult your Caterpillar dealer for more information about proper tire inflation pressures.
Caterpillar Information System:
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E092 Boost Pressure Above Normal
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Main Control Valve
Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400} Installation of Additional Parts for the Stabilizer Conversion Kit (Access Platform){1408, 5057, 5468, 5481, 7167, 7221, 7222, 7332, 7400}
988H Wheel Loader Braking System Brake Accumulator - Test and Charge
2004/12/27 Two New Track Presses Are Now Available {0700, 0729}
PS-150C Pneumatic Compactor Machine System Steering Hydraulic System
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Install
R2900G Load Haul Dump Power Train Differential and Bevel Gear (Rear) - Remove
R2900G Load Haul Dump Power Train Oscillating Axle (Rear) - Install
446D Backhoe Loader Machine Systems Swing Frame - Install
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070} Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
AP-800D and BG-230D Asphalt Pavers Machine Systems Generator Frequency - Test and Adjust
C15 and C18 Engines for Caterpillar Built Machines Fuel System Pressure - Test
CB-334E and CB-335E Series II Paving Compactors Tire Inflation - Check
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks E093 Boost Pressure Below Normal
834H Wheel Dozer and 836H Landfill Compactor Power Train Fill Pressure for the Impeller Clutch of the Torque Converter (Operator Monitor) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Relief Valve (Main)
330C Excavator Cab Door
Topcon® System Five Operation
330C Excavator Sun Screen - If Equipped
834H Wheel Dozer and 836H Landfill Compactor Power Train Fill Time for the Transmission Clutch (Operator Monitor) - Calibrate
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Relief Valve (Line)
2004/11/29 A Pinion Setting Tool and a Wrench Help the Technician Determine the Shim Pack Thickness for the Differential {0722, 0767}