Worksheets
Show/hide table
Hydraulic Fan Drive Test     | |||
Machine Model     |     | Today's Date     |     |
Machine Serial Number     |     | Machine Hours     |     |
ECM Flash File     |     | Flash File Date     |
    |
Show/hide table
Hydraulic Fan Control Temperatures     | |||||
Temperatures During The Test     | |||||
Aftercooler     | Jacket Water     | Transmission Lube     | Torque Converter     | Brake     | Steering Oil     |
    |     |     |     |     |     |
Show/hide table
Hydraulic Fan Speed Override Test     | ||||
Fan Override Speed     | Actual Fan Speed At Low Idle     |
Pump Pressure At Low Idle     |
Actual Fan Speed At High Idle     |
Pump Pressure At High Idle     |
None     |     |     |     |     |
100 rpm     |     |     |     |     |
200 rpm     |     |     |     |     |
300 rpm     |     |     |     |     |
400 rpm     |     |     |     |     |
500 rpm     |     |     |     |     |
Disconnect The Solenoid.     |     |     |     |     |
Show/hide table
Hydraulic Fan High Pressure Cut Off     |
|
Engine Speed at Low Idle     | Pump Pressure     |
    |     |
Show/hide table
Hydraulic Fan Control Hot Temperature     |
|||||
Engine Speed     | Coolant Temp > 88 °C (191 °F)     |
TC Temp > 88 °C (191 °F)     |
Desired Fan Speed     | Actual Fan Speed     | Actual Pump Pressure     |
High Idle Neutral No Service Brakes     |
Actual Temp     | Actual Temp     |     |     |     |
High Idle Neutral Retarder Engaged     |
    |     |     |     |     |
TC Stall     |     |     |     |     |     |
Show/hide table
Hydraulic Fan Control Hoist Lever Operation     |
|||||
Engine Speed     | Coolant Temp > 88 °C (190 °F)     |
TC Temp > 88 °C (190 °F)     |
Hoist Lever Position     | Desired Fan Speed     | Actual Fan Speed     |
High Idle Neutral No Service Brakes     |
Actual Temp     | Actual Temp     | Raise or Lower     |
200 rpm     |     |
Caterpillar Information System:
R1300G Load Haul Dump Power Train Differential
725 and 730 Articulated Trucks Operator Controls
3054E Industrial Engine Engine Oil Pump
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2003/07/21 A New Flywheel Is Available {1156}
992G Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Replace
3054E Industrial Engine Lifter Group - Remove and Install
533 and 543 Wheel Feller Bunchers Engine Supplement Turbocharger - Remove and Install
TH210 and TH215 Telehandlers Hydrostatic Transmission Electronic Control System Speed Sensor - Replace
533 and 543 Wheel Feller Bunchers Power Train Transmission Gearbox - Install
570B and 580B Wheel Harvesters Machine Systems Front Frame to Rear Frame - Connect
2003/08/01 New Flywheels Are Used {1156}
2003/02/17 Correction to Service Magazine , "New Water Pumps for Machines with 3500 Engines" {1361, 1389}
725 and 730 Articulated Trucks Refrigerant Dryer - Replace
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
844 Wheel Dozer Lubricant Viscosities
R1300G Load Haul Dump Power Train NoSPIN Differential
797 Off-Highway Truck Steering Accumulator - Remove
R1300G Load Haul Dump Power Train Fixed Axle (Front)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Drive Shaft
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Meter Group
Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034} Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034}
R1300G Load Haul Dump Power Train Oscillating Axle (Rear)
TH350B, TH355B, TH360B and TH460B Telehandlers Capacities (Refill)