Transmission Gearbox - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1U-7505 | Hydraulic Jack | 1 |
- Rotate transmission gearbox (11) in order to install plate assembly (12). Install transmission gearbox (11).
Show/hide table
Illustration 2 g00975544 - Install the bolt, washers and mount (10).
Show/hide table
Illustration 3 g00975543 - Install bolts (9).
- Remove Tooling (A).
Show/hide table
Illustration 4 g00975542 - Install bolts, washers, and mounts (5) and (8). Install bolts and nuts (6) and (7).
Show/hide table
Illustration 5 g00975541 - Position tube assembly (4) and tighten nut (3). Install bolts (2).
Show/hide table
Illustration 6 g00975540 - Connect hose assembly (1).
- Lower the machine to the ground.
- Add oil to the transmission gearbox. Refer to the Operation and Maintenance Manual for the machine that is being serviced.
Show/hide table
Illustration 1 | g00975545 |
End By:
- Install the center drive shaft. Disassembly and Assembly Manual, "Center Drive Shaft - Remove and Install".
- Install the rear drive shaft. Refer to Disassembly and Assembly Manual, "Rear Drive Shaft - Remove and Install".
- Install the hydraulic drive motor. Refer to Disassembly and Assembly Manual, "Hydraulic Drive Motor - Remove and Install".
Caterpillar Information System:
570B and 580B Wheel Harvesters Machine Systems Front Frame to Rear Frame - Connect
2003/08/01 New Flywheels Are Used {1156}
770 and 772 Off-Highway Truck Chassis Electronic Control System Speed Sensor - Adjust
2002/11/01 New Software Helps Eliminate Erroneous Logging Of Diagnostic Codes {7620}
2002/11/18 The New Special Instruction, REHS1467 , "Instructions for the Relocation of the Front Engine Oil Filters on the 797 Off-Highway Truck" Is Available {1308}
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Machine Preparation for Testing and Adjusting
IQAN<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Monitoring ; Control System Operation State (B-Series Forwarder)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Compactor Drum
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Spray Nozzle - Adjust
HF181, HF201, HF201B, HF202, HF221 and HF222 Felling Heads Disc Saw - Clean/Inspect/Replace
CP-563E, CP-573E, CS-563E, CS-573E and CS-583E Vibratory Soil Compactors Propel System Propel System
2002/12/16 A New Sleeve Is Available To Protect The Silencer For The Air Starter Motor {1451, 1468}
TH210 and TH215 Telehandlers Hydrostatic Transmission Electronic Control System Speed Sensor - Replace
533 and 543 Wheel Feller Bunchers Engine Supplement Turbocharger - Remove and Install
3054E Industrial Engine Lifter Group - Remove and Install
992G Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Replace
2003/07/21 A New Flywheel Is Available {1156}
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
3054E Industrial Engine Engine Oil Pump
725 and 730 Articulated Trucks Operator Controls
R1300G Load Haul Dump Power Train Differential
797 Off-Highway Truck Fan Drive Hydraulic System Worksheets
2003/02/17 Correction to Service Magazine , "New Water Pumps for Machines with 3500 Engines" {1361, 1389}
725 and 730 Articulated Trucks Refrigerant Dryer - Replace