Electronic Control Module (ECM) - Replace
Prior to the replacement of the ECM, ensure that replacement is necessary. The ECM is seldom the cause of a failure. Always check that power is available to all of the contacts of the ECM that are marked with "+ Battery".
Procedure
- Turn the disconnect switch and the key start switch to the OFF position.
- Disconnect the machine harness connectors from the ECM.
- Verify that the part number of the replacement ECM is correct.
- Install the replacement ECM.
- Connect the machine harness to the ECM.
- Turn the disconnect switch and the key start switches to the ON position.
- Verify that the ECM operates correctly.
Caterpillar Information System:
3054E Industrial Engine Lifter Group - Remove and Install
533 and 543 Wheel Feller Bunchers Engine Supplement Turbocharger - Remove and Install
TH210 and TH215 Telehandlers Hydrostatic Transmission Electronic Control System Speed Sensor - Replace
533 and 543 Wheel Feller Bunchers Power Train Transmission Gearbox - Install
570B and 580B Wheel Harvesters Machine Systems Front Frame to Rear Frame - Connect
2003/08/01 New Flywheels Are Used {1156}
770 and 772 Off-Highway Truck Chassis Electronic Control System Speed Sensor - Adjust
2002/11/01 New Software Helps Eliminate Erroneous Logging Of Diagnostic Codes {7620}
2002/11/18 The New Special Instruction, REHS1467 , "Instructions for the Relocation of the Front Engine Oil Filters on the 797 Off-Highway Truck" Is Available {1308}
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Machine Preparation for Testing and Adjusting
IQAN<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Monitoring ; Control System Operation State (B-Series Forwarder)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Compactor Drum
2003/07/21 A New Flywheel Is Available {1156}
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
3054E Industrial Engine Engine Oil Pump
725 and 730 Articulated Trucks Operator Controls
R1300G Load Haul Dump Power Train Differential
797 Off-Highway Truck Fan Drive Hydraulic System Worksheets
2003/02/17 Correction to Service Magazine , "New Water Pumps for Machines with 3500 Engines" {1361, 1389}
725 and 730 Articulated Trucks Refrigerant Dryer - Replace
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
844 Wheel Dozer Lubricant Viscosities
R1300G Load Haul Dump Power Train NoSPIN Differential
797 Off-Highway Truck Steering Accumulator - Remove