NoSPIN Differential
Show/hide table
Illustration 1 | g00275046 |
Note: The adjustment procedures for the NoSPIN differential are the same procedures as the procedures for adjusting the standard differential.
(1) Two 3V-0905 Conical Springs
- Length under test force ... 22.9 mm (0.90 inch)
- Test force ... 512 ± 53 N (115 ± 12 lb)
- Free length after test ... 117.1 mm (4.61 inch)
- Outside diameter ... 128.5748 mm (5.062 inch)
- Test force ... 512 ± 53 N (115 ± 12 lb)
Caterpillar Information System:
844 Wheel Dozer Lubricant Viscosities
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
725 and 730 Articulated Trucks Refrigerant Dryer - Replace
2003/02/17 Correction to Service Magazine , "New Water Pumps for Machines with 3500 Engines" {1361, 1389}
797 Off-Highway Truck Fan Drive Hydraulic System Worksheets
R1300G Load Haul Dump Power Train Differential
725 and 730 Articulated Trucks Operator Controls
3054E Industrial Engine Engine Oil Pump
2002/12/01 The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2003/07/21 A New Flywheel Is Available {1156}
992G Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Replace
3054E Industrial Engine Lifter Group - Remove and Install
797 Off-Highway Truck Steering Accumulator - Remove
R1300G Load Haul Dump Power Train Fixed Axle (Front)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Drive Shaft
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Meter Group
Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034} Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034}
R1300G Load Haul Dump Power Train Oscillating Axle (Rear)
TH350B, TH355B, TH360B and TH460B Telehandlers Capacities (Refill)
TH210 and TH215 Telehandlers Engine Supplement Hydraulic System Pressure - Release
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Pump Flow - Test
HF181, HF201, HF201B, HF202, HF221 and HF222 Felling Heads Arm to Frame Clearance - Check/Adjust
533 and 543 Wheel Feller Bunchers Engine Supplement Electric Starting Motor - Remove and Install
533 and 543 Wheel Feller Bunchers Engine Supplement Alternator - Remove and Install