CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Caterpillar


Vibratory Meter Group

Usage:

CB-534D B5M



图 1g00938102

(1) 螺栓的扭矩 ... 25 ± 5 N·m (18 ± 4 lb ft)

(2) 传感器的间隙 ... 1.14 ± .38 mm (0.045 ± 0.015 in)

Caterpillar Information System:

CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System Vibratory Drive Shaft
R1300G Load Haul Dump Power Train Fixed Axle (Front)
797 Off-Highway Truck Steering Accumulator - Remove
R1300G Load Haul Dump Power Train NoSPIN Differential
844 Wheel Dozer Lubricant Viscosities
2003/02/10 Use the Correct Accessory Drive Shaft with the Cage Assembly {1207}
725 and 730 Articulated Trucks Refrigerant Dryer - Replace
2003/02/17 Correction to Service Magazine , "New Water Pumps for Machines with 3500 Engines" {1361, 1389}
797 Off-Highway Truck Fan Drive Hydraulic System Worksheets
R1300G Load Haul Dump Power Train Differential
725 and 730 Articulated Trucks Operator Controls
3054E Industrial Engine Engine Oil Pump
Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034} Procedure to Install an Implement and Steering Lockout for the R1700G Load Haul Dump (STIC Steering Machines){3034}
R1300G Load Haul Dump Power Train Oscillating Axle (Rear)
TH350B, TH355B, TH360B and TH460B Telehandlers Capacities (Refill)
TH210 and TH215 Telehandlers Engine Supplement Hydraulic System Pressure - Release
TK711, TK721, TK722 and TK732 Track Feller Bunchers Hydraulic System Pump Flow - Test
HF181, HF201, HF201B, HF202, HF221 and HF222 Felling Heads Arm to Frame Clearance - Check/Adjust
533 and 543 Wheel Feller Bunchers Engine Supplement Electric Starting Motor - Remove and Install
533 and 543 Wheel Feller Bunchers Engine Supplement Alternator - Remove and Install
533 and 543 Wheel Feller Bunchers Engine Supplement Aftercooler Core - Remove and Install
2003/01/01 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
2003/01/06 Spacer Installation is Now Recommended for Improved Oil Control on 3100 Camshaft Housing Covers {1210}
725C2 Articulated Truck Engine and Machine Warm-Up
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.