Usage:
914G (7ZM, 9WM) Wheel Loaders IT14G (8ZM, 1WN) Intergrated Toolcarriers.
Description of Change:
Bank Valve And Tube Assembly Replacement
The chart above shows the new bank valves (implement control) that have replaced the former bank valves (implement control) on the 914G Wheel Loaders and the IT14G Integrated Toolcarriers in all of the hydraulic mounting and valve groups listed. The new bank valves (implement control) have a new outlet housing. The new outlet housing restricts oil returning to the tank which improves the operation operation of the make up valve. This will prevent the rod end of the lift cylinder from becoming void of oil when a heavy load is being lowered. A new tube assembly is also being released.
Adaptable To: The new bank valves (implement control) are adaptable to the 914G Wheel Loaders and IT14G Integrated Toolcarriers back to the first production units.
The new tube assemblies listed supercede the former tube assemblies. The new tube assemblies become effective with the new bank valves (implement control) as stated in the "New Bank Valves (Implement Control) Effectivity" at the end of this article.
Replace the former parts with the new parts as stated in the two above charts.
Bank Valve Conversions
The former bank valves (implement control) for the 914G Wheel Loaders and the IT14G Integrated Toolcarriers can be converted to the new bank valves (implement control). The new tube assemblies listed in the two adaption charts are part of the parent groups (hydraulic mounting and valve groups) listed in the "New Bank Valves (Implement Control)" chart. The new tube assemblies supercede the former tube assemblies in all of the hydraulic mounting and valve groups listed. Conversion instructions are as follows.
Two Bank Valve Conversion
Illustration 1.
Valve Conversions.
Illustration 2.
1. Remove the three nuts (1) that hold outlet housing (2) onto the bank valves (implement control).
2. Remove 106-3118 Outlet Housing (2).
3. Remove 061-8324 Rod (3).
4. Remove 106-3100 Rods (4).
5. Remove 114-8688 Tube Assembly, (5) in Illustration 2.
Illustration 3.
Valve Conversions.
Illustration 4.
Valve Conversions.
6. Install 121-5860 Outlet Housing (6) in place of (2).
7. Install 121-9227 Rod (7) in place of (3).
8. Install 121-9226 Rods (8) in place of (4).
9. Install 137-9787 Tube Assembly, (9) in Illustration 4, place of (5).
10. Install the three nuts, (1) in Illustration 3, that hold outlet housing (2) on to the bank valves (implement control).
Three Bank Valve Conversion
Illustration 5.
Valve Conversions.
Illustration 6.
Valve Conversions.
1. Remove the three nuts (1) that hold outlet housing (2) onto the bank valves (implement control).
2. Remove 106-3118 Outlet Housing (2).
3. Remove 106-5873 Rod (3).
4. Remove 106-5872 Rods (4).
5. Remove 112-5122 Tube Assembly, (5) in Illustration 6.
Illustration 7.
Valve Conversions.
Illustration 8.
Valve Conversions.
6. Install 121-5860 Outlet Housing (6) in place of (2).
7. Install 121-9229 Rod (7) in place of (3).
8. Install 121-9228 Rods (8) in place of (4).
9. Install 137-9789 Tube Assembly ,(9) in Illustration 8, in place of (5).
10. Install the three nuts ,(1) in Illustration 7, that hold outlet housing (2) onto the bank valves (implement control).
Four Bank Valve Conversion
Illustration 9.
Valve Conversions.
Illustration 10.
Valve Conversions.
1. Remove the three nuts (1) that hold outlet housing (2) onto the bank valves (implement control).
2. Remove 107-1003 Outlet Housing (2).
3. Remove 114-8689 Tube Assembly (3) in Illustration 10.
Illustration 11.
Valve Conversions.
Illustration 12.
Valve Conversions.
4. Install 121-5860 Outlet Housing ,(4) in Illustration 11, in place of (2).
5. Install 137-9790 Tube Assembly ,(5) in Illustration 12, in place of (3).
6. Install the three nuts ,(1) in Illustration 9, that hold outlet housing (2) onto the bank valves (implement control).
Manufacturing Effectivity
The new bank valves (implement control) were used in production with the following serial numbers.
