1998/03/23 Caterpillar

Use 143-7597 Differential Lifting Bracket To Remove Differential Assembly{3258}

Usage:

24H (7KK) Motor Grader

Warranty: G

Features/Benefits

* Used to remove differential assembly from machine without removing axle and tandems (makes removal and installation of differential assembly easier and safer).

* Used with 5P-7279 Lifting Hook Assembly.

* Using bracket and hook keeps differential assembly level and aligned with mating components.

Specifications/Technical Information

Overall size - 270 mm x 325 mm x 25.4 mm (10.6 in x 12.8 in x 1.00 in)

Hole diameter - 26 mm (1.0 in)

Load lift capacity - 1010 kg (2225 lbs)

143-7597 Differential Lifting Bracket

Caterpillar Information System:

1998/03/23 Bezel Prevents Inadvertent Seat Adjustment{7312,7324}

1998/03/23 Use 143-7145 Lifting Bracket To Remove And Install Cast Driver{0632}

1998/03/23 Service Magazine Special Edition, SEPD0392, Available{0374}

1998/03/16 Improved Telehandler Electrical System Requires New Fuses{1609,1417}

1998/03/16 Procedure For Keeping Boom Pads Tight{6460}

1998/03/16 New Bank Valves (Implement Control) Prevent Lift Cylinder Voiding{5051}

1998/03/16 New Torque Converter Inlet Relief Valve Now Used{3133}

1998/03/16 New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}

1998/03/16 Correction To Service Manual Module, SENR5956-01, Specifications, Systems Operation, Testing & Adjusting, 938F Wheel Loader And IT38F Integrated Toolcarrier Traction Control System{0374}

1998/03/16 New Parking Brake Control Valve Available{4265,4282}

1998/03/16 Improved Solenoid Valve Group Used In ICM And Planetary Transmissions For Increased Reliability And Longer Service Life{3030}

1998/03/16 Water Coolant Hose Made Of Improved Material To Increase Service Life{1380}

1998/03/23 Use 139-7050 For Initial Pressure Adjustment Procedure{3150}

1998/03/23 Improved Door Handles And Latches Improve Operation{7308}

1998/03/23 New Custom Product Support Literature Is Available For 776B, 776C, 776D Tractors And 777B, 777C, 777D Trucks Equipped With 3Z-5422 (Factory Install) Or 3Z-6037 (Field Install) Flexxaire Fan Drive Group{0374,1359}

1998/03/23 New Custom Product Support Literature Is Available For 785B Trucks Equipped With 3Z-5232 Espar Heater Arrangement (Factory And Field Installation){0374,1296}

1998/03/23 A New Engine Auxiliary Water Pump Group (SCAC) And Changes To The Aftercooler Water Lines Group Provide Increased Serviceability{1371}

1998/03/23 Supplement To Disassembly And Assembly Manual; Procedure To Remove Torque Converter And Hydraulic Retarder{3109,3101,3115,3120,3123,3124,3133}

1998/03/23 Supplement To Article Titled, "Improved Bearings Used In Output Transfer Gear Group"{3159}

1998/03/23 Procedure To Check Hydrofill Levels In Tires{4207}

1998/03/23 Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}

1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}

1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}

1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}