Usage:
24H (7KK) Motor Graders;
773D (7ER),
775D (6KR),
793C (4AR) Off-Highway Trucks;
5110 (7GN, 8HN) Excavators;
D11R (9TR, 9XR, 8ZR) Track-Type Tractors;
824G (4SN),
834B (7BR, 92Z) Wheel Tractors;
825G (6RN) Soil Compactors;
826G (7LN),
836 (3RL, 7FR) Landfill Compactors;
980C (13B, 2XD, 63X),
980F (8CJ, 5XJ, 3HK),
980F Series II (8JN, 4RN),
980G (9CM, 2KR, 2SR),
988B (62Y),
988F (8YG),
988F Series II (2ZR) Wheel Loaders
- SUPPLEMENT: APRIL 27, 1998
Service Magazine SEPD0408, Article 18, Page 13; March 16, 1998; "New Tightening Procedure for 109-0987 Drain Assembly".
The part number for the drain assembly is incorrect. Replace the title of this article with the following:
New Tightening Procedure For 129-0987 Drain Assembly
--------------- END SUPPLEMENT ---------------
Description of Change: A 25.4 mm (1.00 in) pipe (1) is needed in order to activate the 129-0987 Drain Assembly. The drain assembly may be damaged if the pipe that is used to activate the valve is over-tightened. The pipe should be HAND TIGHTENED only. Use of pliers or a similar tool will over-tighten the pipe and cause internal damage to the valve.
Adaptable To: The 129-0987 Drain Assembly is used in the models listed above in one or more of the following locations: torque converter, transmission, transfer gear group, and hydraulic tank.
Illustration 1.