1998/03/23 Caterpillar


New Custom Product Support Literature Is Available For 776B, 776C, 776D Tractors And 777B, 777C, 777D Trucks Equipped With 3Z-5422 (Factory Install) Or 3Z-6037 (Field Install) Flexxaire Fan Drive Group{0374,1359}

Usage:


776B (6JC),
776C (2TK),
776D (5ER) Tractors;
777B (4YC),
777C (4XJ) 777D (3PR) Off-Highway Trucks

SEBC1166-01, "Supplementary Product Support Literature for 776B, 776C, 776D Tractors and 777B, 777C, 777D Trucks Equipped with 3Z-5422 (Factory) or 3Z-6037 (Field) Flexxaire Fan Drive Group" is available through normal literature ordering channels.

For additional information on Flexxaire Fan Drive Group, refer to SEBC1184, "Flexxaire Fan Operation & Maintenance Manual" for 776B, 776C, 776D Tractors and 777B, 777C, 777D Trucks.

Caterpillar Information System:

1998/03/23 Improved Door Handles And Latches Improve Operation{7308}
1998/03/23 Use 139-7050 For Initial Pressure Adjustment Procedure{3150}
1998/03/23 Use 143-7597 Differential Lifting Bracket To Remove Differential Assembly{3258}
1998/03/23 Bezel Prevents Inadvertent Seat Adjustment{7312,7324}
1998/03/23 Use 143-7145 Lifting Bracket To Remove And Install Cast Driver{0632}
1998/03/23 Service Magazine Special Edition, SEPD0392, Available{0374}
1998/03/16 Improved Telehandler Electrical System Requires New Fuses{1609,1417}
1998/03/16 Procedure For Keeping Boom Pads Tight{6460}
1998/03/16 New Bank Valves (Implement Control) Prevent Lift Cylinder Voiding{5051}
1998/03/16 New Torque Converter Inlet Relief Valve Now Used{3133}
1998/03/16 New Tightening Procedure For 129-0987 Drain Assembly{3001,3002,3030,3101,3159,5056}
1998/03/16 Correction To Service Manual Module, SENR5956-01, Specifications, Systems Operation, Testing & Adjusting, 938F Wheel Loader And IT38F Integrated Toolcarrier Traction Control System{0374}
1998/03/23 New Custom Product Support Literature Is Available For 785B Trucks Equipped With 3Z-5232 Espar Heater Arrangement (Factory And Field Installation){0374,1296}
1998/03/23 A New Engine Auxiliary Water Pump Group (SCAC) And Changes To The Aftercooler Water Lines Group Provide Increased Serviceability{1371}
1998/03/23 Supplement To Disassembly And Assembly Manual; Procedure To Remove Torque Converter And Hydraulic Retarder{3109,3101,3115,3120,3123,3124,3133}
1998/03/23 Supplement To Article Titled, "Improved Bearings Used In Output Transfer Gear Group"{3159}
1998/03/23 Procedure To Check Hydrofill Levels In Tires{4207}
1998/03/23 Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.