Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
Usage:
3500A Diesel, 3500B Diesel, 3500 Magneto, EIS Gas Engines
Warranty: G
Features/Benefits
-
- * Used to accurately set engine valve lash with factory setting methods.
- * Installation of tools is quick and easy with adjustment of indicator position required on initial set-up only.
- * Removal of fuel lines not necessary to measure valve lash.
- * Adding 147-2058 Extension to indicator allows valve lash to be measured on Magneto Gas engine without removing spark plug extension.
- * Socket and torque wrench used to torque rocker arm nuts are preset at factory to 70 N·m (52 ft.lbs.) - weight of torque wrench alone sets value of valve lash
- * Valve bridge adjustment can be made without removing the rocker arm. Use the 147-5536 Contact Point, 147-2058 Extension and 148-7211 Socket to make the adjustment.
- * A slide rule type torque computer, Form SEHS7150, is available to determine torque wrench dial reading for different extensions.
- * This tool will not fit on some early 3500 Engines with old fuel manifolds.
- * Dial Indicator is not included in group - choice of 147-2056 (in) or 147-5537 (mm) is available .
- * Used to accurately set engine valve lash with factory setting methods.
147-5482 Valve Lash Adjustment Group
Reference: Special Instruction; REHS0128; Using the 147-5482 Indicator Guage Group For Valve Lash And Valve Bridge Adjustment.
Caterpillar Information System:
1998/03/23 Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23 Procedure To Check Hydrofill Levels In Tires{4207}
1998/03/23 Supplement To Article Titled, "Improved Bearings Used In Output Transfer Gear Group"{3159}
1998/03/23 Supplement To Disassembly And Assembly Manual; Procedure To Remove Torque Converter And Hydraulic Retarder{3109,3101,3115,3120,3123,3124,3133}
1998/03/23 A New Engine Auxiliary Water Pump Group (SCAC) And Changes To The Aftercooler Water Lines Group Provide Increased Serviceability{1371}
1998/03/23 New Custom Product Support Literature Is Available For 785B Trucks Equipped With 3Z-5232 Espar Heater Arrangement (Factory And Field Installation){0374,1296}
1998/03/23 New Custom Product Support Literature Is Available For 776B, 776C, 776D Tractors And 777B, 777C, 777D Trucks Equipped With 3Z-5422 (Factory Install) Or 3Z-6037 (Field Install) Flexxaire Fan Drive Group{0374,1359}
1998/03/23 Improved Door Handles And Latches Improve Operation{7308}
1998/03/23 Use 139-7050 For Initial Pressure Adjustment Procedure{3150}
1998/03/23 Use 143-7597 Differential Lifting Bracket To Remove Differential Assembly{3258}
1998/03/23 Bezel Prevents Inadvertent Seat Adjustment{7312,7324}
1998/03/23 Use 143-7145 Lifting Bracket To Remove And Install Cast Driver{0632}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/30 Paint Color Changes Summarized {7581,7559}
1998/03/30 Correction To Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group {5055}
1998/03/30 Use 133-8877 Field Service Tool Group For Routine Maintenance And Adjustment Operations {7500}
1998/03/30 Procedure To Install Rear Axle On Certain Off-Highway Trucks Has Been Changed {3278,4208}
1998/03/30 New Seat Air Suspension Increases Operator Comfort And Service Life {7300,7312,7318,7321,7324}
1998/03/30 Use FT2546 Preload Tool To Adjust Pinion Bearing Preload {3254}
1998/03/30 Use 1U-9003 Brake Piston Puller For Disassembly And Assembly Of Hydraulic Brake Caliper Group {4256}