1998/03/23 Caterpillar


Replacement Available For 7M-7260 Liquid Gasket{0648,0649,0651}

Usage:


This article replaces the article with the same title in the February 9, 1998 issue.

For many years Caterpillar has sold 7M-7260 Liquid Gasket ("Cat Red"). It can be used for sealing final drive flanges and many other areas. 7M-7260 Liquid Gasket contains 1,1,1-trichloroethane. As a result of the "Montreal Protocol", 1,1,1-trichloroethane (which was suspected of contributing to upper atmosphere ozone depletion) will no longer be manufactured. However, it is still legal to use the existing product in most countries, if the product is labeled properly.

Up to this time, Caterpillar has not found another solvent that has all of the desirable properties of 1,1,1-trichloroethane. Those desirable properties include:

* Non-flammable.
* Excellent solvent properties.
* Rapid evaporation.
* No residual oil film.
* Low toxicity.

Caterpillar continues to provide the non-flammable 7M-7260 Liquid Gasket for those jobs where such a product is necessary.

Unfortunately, the price of 1,1,1-trichloroethane is rapidly increasing and the supply is rapidly dwindling. It is now necessary to provide a less costly alternative product that can be used instead of 7M-7260 Liquid Gasket. This alternative product is now available as 138-8436 (8 ounce brush top can) or 9U-5839 (4 ounce collapsible tube) Liquid Gasket. Both of these new product contain the solvent acetone. ACETONE IS EXTREMELY FLAMMABLE. Acetone is a common solvent that is frequently found as the primary ingredient in lacquer thinner, carburetor cleaners, and some brake and component cleaners. Like 1,1,1-trichloroethane, acetone's desirable properties include:

* Excellent solvent properties.
* Rapid evaporation.
* No residual oil film.

But, unlike 1,1,1-trichloroethane, ACETONE IS EXTREMELY FLAMMABLE. Acetone must not be used in areas where there are open flames, arching, sparks, or hot surfaces. Adequate precautions for fire and explosion prevention must be made when substituting 138-8436 or 9U-5839 Liquid Gasket for 7M-7260 Liquid Gasket. For any questions about these products, contact the Product Manager at Phone Number (309) 675-6713.

Caterpillar Information System:

1998/03/23 Use 142-5055 Insulation Tester Group To Measure And Check Insulation Resistance{4450,0785}
1998/03/23 Use 152-2067 Differential Pressure Gauge To Monitor Aftercooler Pressure Drop In Applications With Crankcase Fumes Recirculation{1063}
1998/03/23 Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23 Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23 Procedure To Check Hydrofill Levels In Tires{4207}
1998/03/23 Supplement To Article Titled, "Improved Bearings Used In Output Transfer Gear Group"{3159}
1998/03/23 Supplement To Disassembly And Assembly Manual; Procedure To Remove Torque Converter And Hydraulic Retarder{3109,3101,3115,3120,3123,3124,3133}
1998/03/23 A New Engine Auxiliary Water Pump Group (SCAC) And Changes To The Aftercooler Water Lines Group Provide Increased Serviceability{1371}
1998/03/23 New Custom Product Support Literature Is Available For 785B Trucks Equipped With 3Z-5232 Espar Heater Arrangement (Factory And Field Installation){0374,1296}
1998/03/23 New Custom Product Support Literature Is Available For 776B, 776C, 776D Tractors And 777B, 777C, 777D Trucks Equipped With 3Z-5422 (Factory Install) Or 3Z-6037 (Field Install) Flexxaire Fan Drive Group{0374,1359}
1998/03/23 Improved Door Handles And Latches Improve Operation{7308}
1998/03/23 Use 139-7050 For Initial Pressure Adjustment Procedure{3150}
1998/03/23 Use 143-6092 Pressure Meter To Measure Differential, Static, And Peak Pressures In Hydraulic Systems{3000,4100,4112,4351,5050,5070,5450,5454,0727}
1998/03/23 Replacements Products Available For 4C-4079 Brake And Component Cleaner{0680}
1998/03/30 Paint Color Changes Summarized {7581,7559}
1998/03/30 Correction To Proper Assembly Of Elbow And O-Ring Seal For The Piston Pump Group {5055}
1998/03/30 Use 133-8877 Field Service Tool Group For Routine Maintenance And Adjustment Operations {7500}
1998/03/30 Procedure To Install Rear Axle On Certain Off-Highway Trucks Has Been Changed {3278,4208}
1998/03/30 New Seat Air Suspension Increases Operator Comfort And Service Life {7300,7312,7318,7321,7324}
1998/03/30 Use FT2546 Preload Tool To Adjust Pinion Bearing Preload {3254}
1998/03/30 Use 1U-9003 Brake Piston Puller For Disassembly And Assembly Of Hydraulic Brake Caliper Group {4256}
1998/03/30 New Custom Product Support Literature Is Available For 793C Trucks Equipped With 3Z-6278 Towing Bumper {0374,7156}
1998/03/30 Final Drive Screen Assembly For Large Off-Highway Trucks Has Been Removed {4208,4051,4050}
1998/03/30 Use FT2461 Pressing Bar, FT2462 Pressing Tube, FT2463 Ring, FT2464 Plate, FT2465 Plate, FT2466 Mounting Plate, And FT2467 Rotating Plate To Disassemble And Assemble Variable Speed Fan Clutch {1359}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.