Usage:
IT38F (6FN, 5DR) Integrated Toolcarriers, 938F (1KM, 2RM, 8SM) Wheel Loaders
Reference: Service Manual Module, SENR5956-01, Specifications, Systems Operation, Testing & Adjusting, 938F Wheel Loader And IT38F Integrated Toolcarrier Traction Control System; Pages 4 and 28. This module is found in Service Manual, SENR6700, 938F Wheel Loader, IT38F Integrated Toolcarrier.
On Page 4 under the section titled "On/Off Pilot Solenoid Valve", the coil resistance specified is incorrect. The correct coil resistance at 25 C° (77 F°) should be 34 ± 2 ohms.
On Page 28 the resistance specified for On/Off Pilot Solenoid is incorrect. This should be corrected to read as follows:
-
- * FOR ON/OFF PILOT SOLENOID - Resistance is from 32 to 36 ohms; the harness circuit resistance is correct.
On Page 28 the resistance specified for On/Off Proportional Solenoid Valve is incorrect. This should be corrected to read as follows:
-
- * FOR PROPORTIONAL SOLENOID VALVE - Resistance is from 7 to 12 ohms; the harness circuit resistance is correct.