1977/01/24 Caterpillar


Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}

Usage:


3408, 3412 Engines

An FT1345 Adapter can be made to permit the use of the FT165 Fixture during disassembly and assembly of AiResearch turbocharger models TV81 and TW81. The flange on the center housings for the TV81 and TW81 model turbochargers is too small in diameter to be used with other adapters.


Dimensions to fabricate an FT1345 Adapter.

Caterpillar Information System:

1977/01/24 Exhaust Valve Guides With A Counterbore Are Now Available{1104}
1977/01/24 Exhaust Manifold Coupling With A Slip Fit Now Used Instead Of A Coupling With Piston Rings{1061}
1977/01/24 Drain All Coolant From Engines Before Shipment For Remanufacturing{0355,1350}
1977/01/17 New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17 New Flywheel Assemblies Are Available For Use With Spicer Transmissions{1156}
1977/01/17 New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17 SIRS Component Code List{0331}
1977/01/17 New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17 Blades For Hose Saw Cut Off Group Must Now Be Sent To New Address To Be "Resharpened"{0664}
1977/01/17 Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17 Removal Of Bolts With Metal Locks Easier With New Sockets{0610}
1986/12/22 New Torque Control Group Used In Governor And Fuel Injection Pump Group{1264}
1977/01/24 Same Valve Camshaft Assembly Used On Direct Injection Engines Now Used On Engines That Have Precombustion Chambers{1210}
1977/01/24 Coupling With A Slip Fit Now Used At Turbocharger Exhaust Outlet Instead Of Coupling With Piston Rings{1061}
1977/01/24 New Cylinder Liners{1216}
1977/01/24 Lightening Holes Not Drilled In Some Crankshafts{1202}
1977/01/31 New Disconnect Switch Assembly Has Better Resistance To Corrosion{1411}
1977/01/31 Improved Crankshaft Main Bearing With Higher Strength Aluminum Alloy{1203}
1977/01/31 New Remote Control Switch Assembly For Electric Hydraulic Pumps{0621,0623}
1977/01/31 Transportation Notice Plate Is No Longer Needed For Pressurized Nitrogen Cylinders{7557}
1977/01/31 Low Emission Truck Engines With Exhaust Gas Recirculation (EGR) Systems{1050}
1977/02/14 Correct Use Of Plugs In Drain Holes Of Hydraulic Pumps That Have Two Seals On The Shaft-Use A Plug In Drain Hole Except With Water Glycol Systems{5055,5073}
1977/02/14 New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14 Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.