New Software Is Used on Certain C9 and C13 Engines {1920}
- Industrial Engine
- C13 INDUSTRIAL (S/N: RRA1-81001; LGK1-81004)
- C9 INDUSTRIAL (S/N: MBD1-81001; REH1-8044)
- Petroleum Power Train Package
- CX31-P600-C13I (S/N: PDN1-164)
- CX31-P600-C9I (S/N: PDZ1-158)
Description Of Change: The new software will include new diagnostic messages that will now be shown on the display screen. The diagnostic messages will be shown for injector power supply and injection pressure.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Refer to Table 1 for the new and former software part numbers.
Show/hide table
| New Software Number | Former Software Numbers |
| 478-3761 Engine Software | 397-1642 Engine Ratings Electronic Software Gp |
| 516-1477 Engine Software | 390-9267 Engine Ratings Electronic Software Gp |
Caterpillar Information System:
C175 Oil&Gas Offshore Engine Electrical Power Supply - Test
3600 Heavy Fuel Engines Engine Operation
Photovoltaic Inverters Reference Material
3512B Generator Set Engines with Dynamic Gas Blending Injector Solenoid - Test
G3500H Generator Set Engine Fuel Differential Pressure Is High
3516B Generator Set Engines with Dynamic Gas Blending Electrical Power Supply - Test
3516B Generator Set Engines with Dynamic Gas Blending Sensor Signal (Analog, Passive) - Test
3516B Generator Set Engines with Dynamic Gas Blending Sensor Signal (Analog, Active) - Test
C175 Oil&Gas Offshore Engine Clean Fuel Module - Test
A New Turbocharger Is Now Used On Certain C175-16 Engines {1052, 1053} A New Turbocharger Is Now Used On Certain C175-16 Engines {1052, 1053}
C175 Oil&Gas Offshore Engine Fuel Rail Pressure Leakage Is High
797F and 797F XQ Off-Highway Trucks Machine Systems Oil Cooler Core (Brake) - Remove and Install
C175 Oil&Gas Offshore Engine Circuit Breaker - Test
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100}
A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258} A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258}
G3512 Generator Set Engine Aftercooler - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Left Hand
Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408} Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408}
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216}
Special Instruction, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks" is Now Available {1401, 1402, 1408} Special Instruction, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks" is Now Available {1401, 1402, 1408}
G3512 Generator Set Engine Aftercooler - Assemble
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
349F and 352F Excavators Machine System Specifications Piston Pump
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder