Special Instruction, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks" is Now Available {1401, 1402, 1408}
- Off-Highway Truck/Tractor
- All
Reference: Special Instruction, M0077044, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks"
This special instruction contains information and procedure to install connector lock wire on the machines listed above.
Required Tools
Show/hide table
Item | Part Number | Description |
---|---|---|
A | Pliers | |
B | Wrench |
Required Part
Show/hide table
Item | Part Number | Description |
---|---|---|
1 | Lockwire |
Show/hide table
Illustration 1 | g06132902 |
For the complete procedure and parts required to install connector lock wire (1), refer to Special Instruction, M0077044, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks".
The special instruction can be found on Caterpillar Service Information System (SIS) and through the normal literature system.
Caterpillar Information System:
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216}
Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408} Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408}
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Left Hand
G3512 Generator Set Engine Aftercooler - Disassemble
A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258} A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258}
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100}
C175 Oil&Gas Offshore Engine Circuit Breaker - Test
New Software Is Used on Certain C9 and C13 Engines {1920} New Software Is Used on Certain C9 and C13 Engines {1920}
C175 Oil&Gas Offshore Engine Electrical Power Supply - Test
3600 Heavy Fuel Engines Engine Operation
Photovoltaic Inverters Reference Material
3512B Generator Set Engines with Dynamic Gas Blending Injector Solenoid - Test
G3512 Generator Set Engine Aftercooler - Assemble
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
349F and 352F Excavators Machine System Specifications Piston Pump
320D3 and 323D3 Excavators Machine System Specifications Bucket Cylinder
C175 Oil&Gas Offshore Engine Engine Cranks but Does Not Start
G3512 Generator Set Engine Water Temperature Regulators - Remove
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
3516B Generator Set Engines with Dynamic Gas Blending Fuel Metering Valve - Test
C175 Oil&Gas Offshore Engine Coolant Temperature Is High
G3512 Generator Set Engine Water Temperature Regulators - Install
C175 Oil&Gas Offshore Engine Emergency Stop - Test
C175 Oil&Gas Offshore Engine Engine Control Switch - Test