Bucket Cylinder
Show/hide table
| |
| Illustration 1 | g06133007 |
Show/hide table
| Specification for 504-4611 Cylinder and Seal Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 12 | 504-2956 Bolt | Torque to |
| 2 | 2 | 3B-8489 Grease Fitting | Torque to |
| 3 | 1 | 284-7313 Bushing | Bore before assembly is Installation depth is |
| 4 | 1 | 398-0937 Special Locknut | Torque to |
| 5 | 1 | 398-0936 Piston | Torque to |
| C | 1 | 504-4612 Hydraulic Cylinder | Bore is |
| D | 1 | 481-9524 Rod As | Diameter is |
| 6 | 1 | 241-7382 Bushing | Bore before assembly is Installation depth is |
| 7 | 1 | 398-0106 Setscrew | Before assembly, apply Loctite 242 or Anabond 118 to the threads.
Torque to |
Caterpillar Information System:
349F and 352F Excavators Machine System Specifications Piston Pump
320D3 and 323D3 Excavators Machine System Specifications Boom - 5.7 m (18.70 ft)
G3512 Generator Set Engine Aftercooler - Assemble
Special Instruction, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks" is Now Available {1401, 1402, 1408} Special Instruction, "Instructions for Installing Connector Lock Wires on Off-Highway Trucks" is Now Available {1401, 1402, 1408}
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated to Aid in Identifying Cause of Liner Cuff Cracking Certain C175 Generator Set Engines {1000, 1216}
Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408} Instructions for Installing Connector Lock Wires on Off-Highway Trucks {1401, 1402, 1408}
PM820, PM822, and PM825 Cold Planer Machine Systems Side Plate - Remove and Install - Left Hand
G3512 Generator Set Engine Aftercooler - Disassemble
A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258} A New Transmission Output Speed Sensor Mounting Bracket is Now Used on Certain 797F Large Off-Highway Truck {1408, 1439, 3160, 3175, 3258}
Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100} Applied Failure Analysis and Reuse & Salvage Publications Have Been Updated To Aid in Identifying Cause of Inlet Valve Radial Crack on Certain C175 Engines {1100}
C175 Oil&Gas Offshore Engine Circuit Breaker - Test
New Software Is Used on Certain C9 and C13 Engines {1920} New Software Is Used on Certain C9 and C13 Engines {1920}
C175 Oil&Gas Offshore Engine Engine Cranks but Does Not Start
G3512 Generator Set Engine Water Temperature Regulators - Remove
3516B Generator Set Engines with Dynamic Gas Blending Fuel Pressure Problem - Gas System
3516B Generator Set Engines with Dynamic Gas Blending Fuel Metering Valve - Test
C175 Oil&Gas Offshore Engine Coolant Temperature Is High
G3512 Generator Set Engine Water Temperature Regulators - Install
C175 Oil&Gas Offshore Engine Emergency Stop - Test
C175 Oil&Gas Offshore Engine Engine Control Switch - Test
G3500H Generator Set Engine Data Link - Test
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Level Is Low
C175-16 and C175-20 Engines for Off-Highway Truck/Tractors Oil Filter Differential Pressure Problem - If Equipped with the Self-Cleaning Oil Filter
C175 Oil&Gas Offshore Engine Engine Misfires, Runs Rough or Is Unstable